An astronaut overseeing a futuristic data hub

Binding Angle SetupをChatGPTとClaudeに接続

一度設定すれば、ChatGPT、Claude、Cursorなど、お気に入りのクライアントでどれでも動きます。すべては裏側で安全に動くので、あなたは安心して本当に大切なことに集中できます。バイオメカニクスに基づき、最適なセットアップを導き出します

このConnectorについてAIに質問

Vinkiusが開発・運用・ホスティング。

MCP認証済み · 本番環境対応 · Vinkius保証

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

ChatGPTClaudeCursorPerplexityGeminiMicrosoft CopilotRaycastMeta AI

AIが仕事をこなします。私たちが安全に守ります。

他のAIツールではこれは手に入りません。ワークフローはお気に入りのクライアントで動き、アカウントは守られ、エージェントに何を許すかはあなたが決めます。これこそ乗り換えるべき理由です。

すべてのConnectorは当社のインフラストラクチャの中、あなたのワークフローが動くのと同じ場所にあります。下の3つはすでにその一部で、背景で静かに働き、あなたが意識する必要がないようにしてくれます。追加するものも、設定するものも、心配することもありません。

A futuristic MCP client docking bay
V8 Isolate01

各Connectorは独自の密閉された環境内で実行されます。

各Connectorは独自の封印されたV8ランタイムで実行され、ファイル、システム、他のサーバーへのアクセスはありません。Connectorが自身のリクエストを超えて中身を見ることはありません。

Kill Switch02

1つのスイッチで全エージェントを停止。即座に。

1つのアクションで全Connectorを無効化し、全トークンを失効させ、全セッションを終了します。AI Governanceが記録を保持します。

ユーザーごとのFinOps03

驚きではなく、一時停止する支出制限。

各ユーザーは自身の接続と認証情報を持ち、他から隔離されています。支出制限を超える操作は課金されず、あなたの承認を待ちます。

3つのコントロールが、AIが接続するレイヤーに 組み込まれています。

厳選セット · 4機能

届けるのは、本当に必要な動作だけです。

機能セット01 / 01

01-04

このセットには4機能あります。

Binding Angle Setupで使える4機能の一部です。

  1. 01

    スタンスの安定性分析

    選択したスタンス幅が、希望するライディングスタイルに対してどのように作用するかを評価します。

  2. 02

    バインディング角度の算出

    バインディングのポジションを決めるための、核心となる技術的な推奨値を算出します。

  3. 03

    スイッチ適性評価

    特定の角度設定が、スイッチ(逆向き)でのライディングをどの程度サポートできるかを判定します。

  4. 04

    バイオメカニクス安全検証

    提案された角度が、ライダーのスタンスに基づいて関節への過度な負担を招くリスクがないかを確認します。

実際の業務

チームが実際に回している作業

01

Switch Riding Prep

A rider wants to know if their current duck stance will make riding switch easier.

02

Stability Testing

A rider checks if increasing their stance width will make carving more stable.

03

Injury Prevention

A rider validates a new setup to ensure it won't put too much stress on their knees.

04

Freestyle Setup

A rider calculates the best front and rear angles for a 45cm stance.

1つのConnector、すべてのAI

Binding Angle Setupは、最も人気のあるAIクライアントで動きます。

これは最も人気のあるクライアントで、それぞれにステップバイステップのガイドがあります。リンクは1つ、設定は一度、ガバナンスと可視性は最初から組み込み。しかもすべてMCP標準で動くため、同じ接続は他の対応クライアントでもそのまま使えます。作り直す必要はありません。

自社アプリを作っていますか?Connectorはあなたのもの。

Binding Angle Setupを働かせるのにクライアントは不要です。同じホストされた接続が、あなたのアプリやエージェントのコードにそのまま組み込め、すべてのリクエストに同じガバナンスが適用されます。作るのも、会話するのも、1つの接続で両方。

実測値、推定値ではない

平均956ms。本番環境で高速。

Binding Angle Setupは本番サービスに対して毎日チェックされています。

日次平均最大1195ms
10月3日今日
最速日
760ms
最遅日
1195ms
14日間の傾向
安定+1%

クライアントを接続

1つのURL。すべてのクライアント。

Connectorを有効化し、リンクをコピーして、いつも使うクライアントに貼り付けるだけ。4個の機能がすぐに使えます。

プレビューアクセス · プロバイダー認証ではありません

vk_preview_* トークンは Vinkius のプレビューインフラに属します。Claude が Binding Angle Setup のケイパビリティを検出して表示できるようにし、AI の中でその体験を確認できます。

このトークンは Binding Angle Setup のアカウントを認証するものではありません。認証情報や実際のアカウントデータが必要なアクションは、Connector を有効化してサービスを承認するまで実行されない場合があります。

Binding Angle Setup Connector

準備完了です。MCPクライアントを選択し、セットアップ手順に従ってください。

コネクタリンクhttps://edge.vinkius.com/vk_preview_hPZUZeMSaM8YvgvUePDVM9M8aOzxJKAIo863RUQN/mcp

Claude Desktop

以下の手順で数秒で接続できます。

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Binding Angle Setup capabilities are ready to use.
設定 · claude_desktop_config.jsonコピー
{
  "mcpServers": {
    "binding-angle-setup-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_hPZUZeMSaM8YvgvUePDVM9M8aOzxJKAIo863RUQN/mcp"
    }
  }
}
  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

各クライアントの手順ガイドはこちらです。 接続方法

Claude向けのガイド付きセットアップ? Binding Angle SetupをClaudeや他のAIに設定する

このConnectorが対応するすべてのAIクライアントを見る ↑

対象ユーザー

Binding Angle Setupユーザーが任せたい仕事のために。

This MCP is for snowboarders who want to optimize their gear setup based on physics and biology rather than guesswork.

  • 01

    Freestyle Riders

    They ask the AI to find duck stance configurations that favor switch riding.

  • 02

    Carvers

    They use the capability to check if a wider stance will provide enough stability for high-speed turns.

  • 03

    Injury-Conscious Riders

    They hand off their stance data to the AI to ensure their setup won't cause joint strain.

FAQ

Binding Angle Setupユーザーからのよくある質問。

  • 01

    How does this MCP help with snowboard binding angles?

    It uses biomechanical calculations to provide specific front and rear angle recommendations based on your riding style and stance width.

  • 02

    Can I use this to prevent knee pain?

    Yes, the validate_biomechanical_safety capability checks if your proposed angles pose a high risk of joint strain.

  • 03

    Will it tell me if I can ride switch?

    Yes, the get_switch_capability_rating capability determines how well a specific configuration supports riding in the opposite direction.

  • 04

    Does it work with my existing AI capabilities?

    Yes, it works with any MCP-compatible client like Claude, Cursor, or Windsurf once connected via Vinkius.

  • 05

    Can it help with carving stability?

    Yes, the analyze_stance_stability capability evaluates how your stance width affects your stability and agility.

  • 06

    How do I get my recommended binding angles?

    You can use the calculate_binding_angles capability by providing your riding style, stance width, preference, and terrain type.

  • 07

    Can I check if my setup is safe for my knees?

    Yes, use the validate_biomechanical_safety capability to check if your proposed angles pose a risk of joint strain.

  • 08

    How do I know if I'll be good at riding switch?

    The get_switch_capability_rating capability evaluates how well your specific angle configuration supports riding in the opposite direction.

『Binding Angle Setup』を Claude、Cursor、ChatGPT などに接続