An astronaut overseeing a futuristic data hub

Community Class PlannerをChatGPTとClaudeに接続

一度設定すれば、ChatGPT、Claude、Cursorなど、お気に入りのクライアントでどれでも動きます。すべては裏側で安全に動くので、あなたは安心して本当に大切なことに集中できます。収支管理からキャパシティ確認まで、講座の計画をこれ一つで完結。

このConnectorについてAIに質問

Vinkiusが開発・運用・ホスティング。

MCP認証済み · 本番環境対応 · Vinkius保証

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

ChatGPTClaudeCursorPerplexityGeminiMicrosoft CopilotRaycastMeta AI

AIが仕事をこなします。私たちが安全に守ります。

他のAIツールではこれは手に入りません。ワークフローはお気に入りのクライアントで動き、アカウントは守られ、エージェントに何を許すかはあなたが決めます。これこそ乗り換えるべき理由です。

すべてのConnectorは当社のインフラストラクチャの中、あなたのワークフローが動くのと同じ場所にあります。下の3つはすでにその一部で、背景で静かに働き、あなたが意識する必要がないようにしてくれます。追加するものも、設定するものも、心配することもありません。

A futuristic MCP client docking bay
V8 Isolate01

各Connectorは独自の密閉された環境内で実行されます。

各Connectorは独自の封印されたV8ランタイムで実行され、ファイル、システム、他のサーバーへのアクセスはありません。Connectorが自身のリクエストを超えて中身を見ることはありません。

Kill Switch02

1つのスイッチで全エージェントを停止。即座に。

1つのアクションで全Connectorを無効化し、全トークンを失効させ、全セッションを終了します。AI Governanceが記録を保持します。

ユーザーごとのFinOps03

驚きではなく、一時停止する支出制限。

各ユーザーは自身の接続と認証情報を持ち、他から隔離されています。支出制限を超える操作は課金されず、あなたの承認を待ちます。

3つのコントロールが、AIが接続するレイヤーに 組み込まれています。

厳選セット · 4機能

届けるのは、本当に必要な動作だけです。

機能セット01 / 01

01-04

このセットには4機能あります。

Community Class Plannerで使える4機能の一部です。

  1. 01

    教材予算の算出

    講座に必要な教材費の予算を自動的に見積もります。

  2. 02

    講座の収支計算

    受講料、講師謝礼、会場費などの項目から、予想される利益または損失を算出します。

  3. 03

    損益分岐点の特定

    運営コストを補うために最低限必要な受講者数を算出します。

  4. 04

    会場キャパシティの検証

    会場の収容人数や講師の条件に基づき、予定している受講人数が適切かどうかを確認します。

実際の業務

チームが実際に回している作業

01

Pricing a New Course

Decide on a tuition rate by seeing how it affects your total profit and break-even point.

02

Venue Planning

Check if a large group of students can actually fit in your booked community room.

03

Budgeting for Supplies

Get a quick estimate of material costs before you go out to buy supplies for a class.

04

Financial Risk Assessment

Run numbers on a high-cost workshop to see if the risk of low enrollment is too high.

1つのConnector、すべてのAI

Community Class Plannerは、最も人気のあるAIクライアントで動きます。

これは最も人気のあるクライアントで、それぞれにステップバイステップのガイドがあります。リンクは1つ、設定は一度、ガバナンスと可視性は最初から組み込み。しかもすべてMCP標準で動くため、同じ接続は他の対応クライアントでもそのまま使えます。作り直す必要はありません。

自社アプリを作っていますか?Connectorはあなたのもの。

Community Class Plannerを働かせるのにクライアントは不要です。同じホストされた接続が、あなたのアプリやエージェントのコードにそのまま組み込め、すべてのリクエストに同じガバナンスが適用されます。作るのも、会話するのも、1つの接続で両方。

実測値、推定値ではない

平均944ms。本番環境で高速。

Community Class Plannerは本番サービスに対して毎日チェックされています。

日次平均最大1310ms
10月4日今日
最速日
819ms
最遅日
1310ms
14日間の傾向
改善傾向-22%

クライアントを接続

1つのURL。すべてのクライアント。

Connectorを有効化し、リンクをコピーして、いつも使うクライアントに貼り付けるだけ。4個の機能がすぐに使えます。

プレビューアクセス · プロバイダー認証ではありません

vk_preview_* トークンは Vinkius のプレビューインフラに属します。Claude が Community Class Planner のケイパビリティを検出して表示できるようにし、AI の中でその体験を確認できます。

このトークンは Community Class Planner のアカウントを認証するものではありません。認証情報や実際のアカウントデータが必要なアクションは、Connector を有効化してサービスを承認するまで実行されない場合があります。

Community Class Planner Connector

準備完了です。MCPクライアントを選択し、セットアップ手順に従ってください。

コネクタリンクhttps://edge.vinkius.com/vk_preview_DwWwRO1kxs6jV5QbYClHIsjW8h8ddF1ORBTH5wZo/mcp

Claude Desktop

以下の手順で数秒で接続できます。

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Community Class Planner capabilities are ready to use.
設定 · claude_desktop_config.jsonコピー
{
  "mcpServers": {
    "community-class-planner-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_DwWwRO1kxs6jV5QbYClHIsjW8h8ddF1ORBTH5wZo/mcp"
    }
  }
}
  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

各クライアントの手順ガイドはこちらです。 接続方法

Claude向けのガイド付きセットアップ? Community Class PlannerをClaudeや他のAIに設定する

このConnectorが対応するすべてのAIクライアントを見る ↑

対象ユーザー

Community Class Plannerユーザーが任せたい仕事のために。

This MCP is built for people running local workshops, community centers, or independent educational series.

  • 01

    Program Coordinators

    They hand off enrollment numbers and venue costs to the AI to check program viability.

  • 02

    Workshop Instructors

    They use the capability to figure out if their class pricing covers their own fees and supplies.

  • 03

    Community Center Managers

    They use it to ensure different scheduled classes don't exceed room capacities.

FAQ

Community Class Plannerユーザーからのよくある質問。

  • 01

    How do I use this MCP with my AI client?

    You connect once through the Vinkius interface. After that, any MCP-compatible client like Claude or Cursor can use the capabilities directly.

  • 02

    Can this MCP help me set my class prices?

    Yes. You can use the financial capabilities to see how different price points change your profit and how many students you need to break even.

  • 03

    Does it handle venue constraints?

    Yes. The validate_class_capacity capability allows your agent to check if your enrollment numbers are compatible with your venue's limits.

  • 04

    Do I need to host this myself?

    No. Vinkius hosts and manages the MCP for you, so it is ready to use immediately after connection.

  • 05

    What kind of data do I need to provide?

    You'll typically provide student fees, instructor costs, room rental fees, and material costs per student.

  • 06

    How can I check if my class is profitable?

    You can use the calculate_class_financials capability by providing the class price, enrollment count, instructor fees, room rental, and material costs per student.

  • 07

    How do I know how many students I need to cover my costs?

    Use the determine_breakeven_point capability. It calculates the required enrollment based on your fixed costs and the margin per student.

  • 08

    Can I verify if my venue can accommodate the students?

    Yes, the validate_class_capacity capability checks your enrollment against both room capacity and instructor-to-student ratios.

『Community Class Planner』を Claude、Cursor、ChatGPT などに接続