
Waiting for input…
Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.
AIが仕事をこなします。私たちが安全に守ります。
他のAIツールではこれは手に入りません。ワークフローはお気に入りのクライアントで動き、アカウントは守られ、エージェントに何を許すかはあなたが決めます。これこそ乗り換えるべき理由です。
すべてのConnectorは当社のインフラストラクチャの中、あなたのワークフローが動くのと同じ場所にあります。下の3つはすでにその一部で、背景で静かに働き、あなたが意識する必要がないようにしてくれます。追加するものも、設定するものも、心配することもありません。

各Connectorは独自の密閉された環境内で実行されます。
各Connectorは独自の封印されたV8ランタイムで実行され、ファイル、システム、他のサーバーへのアクセスはありません。Connectorが自身のリクエストを超えて中身を見ることはありません。
1つのスイッチで全エージェントを停止。即座に。
1つのアクションで全Connectorを無効化し、全トークンを失効させ、全セッションを終了します。AI Governanceが記録を保持します。
驚きではなく、一時停止する支出制限。
各ユーザーは自身の接続と認証情報を持ち、他から隔離されています。支出制限を超える操作は課金されず、あなたの承認を待ちます。
3つのコントロールが、AIが接続するレイヤーに 組み込まれています。
厳選セット · 4機能
届けるのは、本当に必要な動作だけです。
01-04
このセットには4機能あります。
Hose Flow Volumeで使える4機能の一部です。
- 01
総水量の算出
流量と時間を基に、供給される水の総量を計算します。
- 02
流量単位の変換
GPMなどの単位をL/minへ変換し、計算に使用できる標準的な流量値を提供します。
- 03
灌漑時間の推定
目標とする水量を確保するために、ホースを何分間稼働させる必要があるかを算出します。
- 04
灌漑計画の検証
計画中の灌漑が、設定された水量の制限やタンクの容量を超えていないかを確認します。
実際の業務
チームが実際に回している作業
Tank Capacity Management
Your agent checks if a planned watering session will exceed the capacity of your water tank.
Irrigation Scheduling
You use the agent to figure out how long to run a hose to deliver a specific amount of water.
Flow Rate Conversion
The agent converts GPM to L/min to ensure all your irrigation data uses the same units.
Water Usage Tracking
You calculate the total volume of water dispensed over a specific period of time.
1つのConnector、すべてのAI
Hose Flow Volumeは、最も人気のあるAIクライアントで動きます。
これは最も人気のあるクライアントで、それぞれにステップバイステップのガイドがあります。リンクは1つ、設定は一度、ガバナンスと可視性は最初から組み込み。しかもすべてMCP標準で動くため、同じ接続は他の対応クライアントでもそのまま使えます。作り直す必要はありません。
Claude
ChatGPT
Gemini
Perplexity
Grok
Microsoft Copilot
Cursor
VS Code
Windsurf
JetBrains
Cline
LangChain
Vercel AI SDK
Lovable
Z.ai
Raycast
Qwen Code
Kimi Code
Le Chat自社アプリを作っていますか?Connectorはあなたのもの。
Hose Flow Volumeを働かせるのにクライアントは不要です。同じホストされた接続が、あなたのアプリやエージェントのコードにそのまま組み込め、すべてのリクエストに同じガバナンスが適用されます。作るのも、会話するのも、1つの接続で両方。
実測値、推定値ではない
平均902ms。本番環境で高速。
Hose Flow Volumeは本番サービスに対して毎日チェックされています。
- 最速日
- 782ms
- 最遅日
- 1230ms
- 14日間の傾向
- 遅延傾向+11%
クライアントを接続
1つのURL。すべてのクライアント。
Connectorを有効化し、リンクをコピーして、いつも使うクライアントに貼り付けるだけ。4個の機能がすぐに使えます。
プレビューアクセス · プロバイダー認証ではありません
vk_preview_* トークンは Vinkius のプレビューインフラに属します。Claude が Hose Flow Volume のケイパビリティを検出して表示できるようにし、AI の中でその体験を確認できます。
このトークンは Hose Flow Volume のアカウントを認証するものではありません。認証情報や実際のアカウントデータが必要なアクションは、Connector を有効化してサービスを承認するまで実行されない場合があります。
Hose Flow Volume Connector
準備完了です。MCPクライアントを選択し、セットアップ手順に従ってください。
https://edge.vinkius.com/vk_preview_yVLRysQy8zSgKNIaGj0YWYaku7aBH5NsZvD3iVwU/mcpClaude Desktop
以下の手順で数秒で接続できます。
- 1In Claude Desktop, open Settings → Connectors.
- 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
- 3Click Add and start a new chat — Hose Flow Volume capabilities are ready to use.
{
"mcpServers": {
"hose-flow-volume-calculator-mcp": {
"url": "https://edge.vinkius.com/vk_preview_yVLRysQy8zSgKNIaGj0YWYaku7aBH5NsZvD3iVwU/mcp"
}
}
}
Claude
ChatGPT
Cursor
VS Code
Windsurf
Claude Code
JetBrains
Cline
各クライアントの手順ガイドはこちらです。 接続方法
Claude向けのガイド付きセットアップ? Hose Flow VolumeをClaudeや他のAIに設定する
対象ユーザー
Hose Flow Volumeユーザーが任せたい仕事のために。
農業従事者や園芸家、水資源管理を行うプロフェッショナルに最適です。AIを活用して正確な灌漑スケジュールを管理したい方に役立ちます。
- 01
農業従事者
農地の灌漑計画や水資源の効率的な利用を管理する方。
- 02
園芸家
植物への適切な給水時間を計算し、水不足や過剰を防ぎたい方。
- 03
水資源管理者
タンク容量や供給制限に基づいた正確な水管理が必要な方。
FAQ
Hose Flow Volumeユーザーからのよくある質問。
- 01
What can this MCP do for my irrigation planning?
It allows your AI agent to calculate water volumes, estimate hose run times, convert flow units, and validate that your watering plans won't exceed your tank capacity.
- 02
Which AI clients can use this MCP?
You can use this MCP with any compatible client like Claude, Cursor, Windsurf, or VS Code.
- 03
Can I use this to prevent my water tank from overflowing?
Yes, the validate_irrigation_plan capability checks if a planned watering session exceeds your specific water limit or tank capacity.
- 04
Does it support both metric and imperial units?
Yes, the convert_flow_units capability allows the agent to standardize measurements like GPM and L/min.
- 05
Do I need to host the MCP myself?
No, Vinkius hosts and manages the MCP for you, so it is ready to use as soon as you connect your client.
- 06
What units are supported for flow rate?
The server supports Liters per minute (L/min) and Gallons per minute (GPM).
- 07
Can I check if my watering plan will overflow my tank?
Yes, you can use the validate_irrigation_plan capability to compare expected volume against your maximum capacity.
- 08
How do I calculate how long to run my hose?
Use the estimate_duration capability by providing your target volume and the current flow rate.
さがす
Agricultureの他のコネクタ
Irrigation Water Requirement Calculator AIコネクタ
Calculate crop evapotranspiration, water deficit, and required irrigation depths.
表示Water Quality Index Calculator AIコネクタ
Assess water safety for irrigation and livestock using chemical analysis.
表示Plant Watering Volume Calculator AIコネクタ
Calculate total water volume needed for plant collections.
表示Irrigation Water Budget AIコネクタ
Calculate garden irrigation volume and costs based on plant zones and environmental factors.
表示
おすすめ
Water Footprint Calculator AIコネクタ
Calculates multi-dimensional water footprints for chemical manufacturing processes.
表示Water Tank Volume Calculator AIコネクタ
Calculate geometric volume and fluid capacity for rectangular water tanks.
表示ECB Interest Rates — Monetary Policy Rates & Banking AIコネクタ
ECB key policy rates: the Main Refinancing Operations rate (MRO), Deposit Facility Rate (DFR), Marginal Lendin
表示Irrigation Water Optimizer AIコネクタ
Calculate precise weekly water requirements, irrigation frequency, and session dosage for your garden.
表示
『Hose Flow Volume』を Claude、Cursor、ChatGPT などに接続
