An astronaut overseeing a futuristic data hub

Hydro Facial Pressure CalculatorをAIに接続

一度設定すれば、ChatGPT、Claude、Cursorなど、お気に入りのクライアントでどれでも動きます。すべては裏側で安全に動くので、あなたは安心して本当に大切なことに集中できます。施術の精度と安全性を最大限に高めます

このConnectorについてAIに質問

Vinkiusが開発・運用・ホスティング。

MCP認証済み · 本番環境対応 · Vinkius保証

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

ChatGPTClaudeCursorPerplexityGeminiMicrosoft CopilotRaycastMeta AI

AIが仕事をこなします。私たちが安全に守ります。

他のAIツールではこれは手に入りません。ワークフローはお気に入りのクライアントで動き、アカウントは守られ、エージェントに何を許すかはあなたが決めます。これこそ乗り換えるべき理由です。

すべてのConnectorは当社のインフラストラクチャの中、あなたのワークフローが動くのと同じ場所にあります。下の3つはすでにその一部で、背景で静かに働き、あなたが意識する必要がないようにしてくれます。追加するものも、設定するものも、心配することもありません。

A futuristic MCP client docking bay
V8 Isolate01

各Connectorは独自の密閉された環境内で実行されます。

各Connectorは独自の封印されたV8ランタイムで実行され、ファイル、システム、他のサーバーへのアクセスはありません。Connectorが自身のリクエストを超えて中身を見ることはありません。

Kill Switch02

1つのスイッチで全エージェントを停止。即座に。

1つのアクションで全Connectorを無効化し、全トークンを失効させ、全セッションを終了します。AI Governanceが記録を保持します。

ユーザーごとのFinOps03

驚きではなく、一時停止する支出制限。

各ユーザーは自身の接続と認証情報を持ち、他から隔離されています。支出制限を超える操作は課金されず、あなたの承認を待ちます。

3つのコントロールが、AIが接続するレイヤーに 組み込まれています。

厳選セット · 4機能

届けるのは、本当に必要な動作だけです。

機能セット01 / 01

01-04

このセットには4機能あります。

Hydro-Facial Calculatorで使える4機能の一部です。

  1. 01

    デバイス性能の比較

    使用するハードウェアの機能を確認し、施術との互換性を検証します。

  2. 02

    部位別安全プロファイルの確認

    特定の身体部位における強度の制限値や安全基準をチェックします。

  3. 03

    プロトコル概要の取得

    施術の全体的な流れや設定の要約を素早く確認できます。

  4. 04

    施術パラメータの算出

    肌質や部位に合わせた最適な圧力、流量、吸引力などの詳細な設定値を算出します。

実際の業務

チームが実際に回している作業

01

Sensitive Skin Protocols

Your agent calculates low-intensity settings to avoid irritation for sensitive patients.

02

T-Zone Treatment Planning

Get specific pressure and flow settings for oily skin in targeted facial areas.

03

Safety Auditing

Check the safety profile of the neck or eye area before applying suction.

04

Device Capability Checks

Verify that your current hardware can support the required treatment intensity.

1つのConnector、すべてのAI

Hydro-Facial Calculatorは、最も人気のあるAIクライアントで動きます。

これは最も人気のあるクライアントで、それぞれにステップバイステップのガイドがあります。リンクは1つ、設定は一度、ガバナンスと可視性は最初から組み込み。しかもすべてMCP標準で動くため、同じ接続は他の対応クライアントでもそのまま使えます。作り直す必要はありません。

自社アプリを作っていますか?Connectorはあなたのもの。

Hydro-Facial Calculatorを働かせるのにクライアントは不要です。同じホストされた接続が、あなたのアプリやエージェントのコードにそのまま組み込め、すべてのリクエストに同じガバナンスが適用されます。作るのも、会話するのも、1つの接続で両方。

実測値、推定値ではない

平均909ms。本番環境で高速。

Hydro-Facial Calculatorは本番サービスに対して毎日チェックされています。

日次平均最大1086ms
10月3日今日
最速日
655ms
最遅日
1086ms
14日間の傾向
安定-4%

クライアントを接続

1つのURL。すべてのクライアント。

Connectorを有効化し、リンクをコピーして、いつも使うクライアントに貼り付けるだけ。4個の機能がすぐに使えます。

プレビューアクセス · プロバイダー認証ではありません

vk_preview_* トークンは Vinkius のプレビューインフラに属します。Claude が Hydro-Facial Calculator のケイパビリティを検出して表示できるようにし、AI の中でその体験を確認できます。

このトークンは Hydro-Facial Calculator のアカウントを認証するものではありません。認証情報や実際のアカウントデータが必要なアクションは、Connector を有効化してサービスを承認するまで実行されない場合があります。

Hydro-Facial Calculator Connector

準備完了です。MCPクライアントを選択し、セットアップ手順に従ってください。

コネクタリンクhttps://edge.vinkius.com/vk_preview_HU6GdZnpevH1AMuDWsR3OTsdFLUJBTOUZyR3hBsF/mcp

Claude Desktop

以下の手順で数秒で接続できます。

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Hydro-Facial Calculator capabilities are ready to use.
設定 · claude_desktop_config.jsonコピー
{
  "mcpServers": {
    "hydro-facial-pressure-calculator-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_HU6GdZnpevH1AMuDWsR3OTsdFLUJBTOUZyR3hBsF/mcp"
    }
  }
}
  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

各クライアントの手順ガイドはこちらです。 接続方法

Claude向けのガイド付きセットアップ? Hydro-Facial CalculatorをClaudeや他のAIに設定する

このConnectorが対応するすべてのAIクライアントを見る ↑

対象ユーザー

Hydro-Facial Calculatorユーザーが任せたい仕事のために。

美容皮膚科の専門家やエステティシャンが、施術の精度と安全性を担保するために活用できます。

  • 01

    美容皮膚科医

    臨床的な意思決定と、患者の肌質に基づいた正確なパラメータ設定に利用します。

  • 02

    エステティシャン

    デバイスの操作設定を最適化し、安全な施術手順を遵守するために活用します。

  • 03

    クリニック管理者

    施術プロトコルの標準化と、デバイスの互換性管理に役立てます。

FAQ

Hydro-Facial Calculatorユーザーからのよくある質問。

  • 01

    How does this MCP calculate hydro-facial settings?

    It uses skin type, the specific anatomical area, and your device's capabilities to determine pressure, flow, time, and suction.

  • 02

    Can I use this with my existing facial devices?

    Yes, you can use the compare_device_capabilities capability to verify if your hardware supports the calculated settings.

  • 03

    Does it help with patient safety?

    Yes, it includes a capability to check safety profiles for specific body parts to ensure you stay within safe intensity limits.

  • 04

    Which AI clients can I use this with?

    You can use this MCP with any compatible client like Claude, Cursor, Windsurf, or VS Code.

  • 05

    What kind of data does it output?

    It outputs specific mechanical parameters including pressure level, solution flow, treatment time, and suction level.

  • 06

    How does the capability determine pressure settings?

    The capability calculates pressure by analyzing the skin type, the specific treatment area, and the patient's sensitivity level to ensure safe and effective results.

  • 07

    Can I check if my device is compatible with a specific skin profile?

    Yes, you can use the compare_device_capabilities capability to verify if your hardware can meet the required pressure levels for a target skin type.

  • 08

    What information is needed to get a full treatment protocol?

    To use get_treatment_parameters, you need to provide the skin type, the treatment area, the sensitivity level, and the device type.

『Hydro-Facial Calculator』を Claude、Cursor、ChatGPT などに接続