An astronaut overseeing a futuristic data hub

Strain-Counterstrain ProtocolをAIに接続

一度設定すれば、ChatGPT、Claude、Cursorなど、お気に入りのクライアントでどれでも動きます。すべては裏側で安全に動くので、あなたは安心して本当に大切なことに集中できます。Jones技法に基づいた精密な治療計画をAIが迅速に構築します

このConnectorについてAIに質問

Vinkiusが開発・運用・ホスティング。

MCP認証済み · 本番環境対応 · Vinkius保証

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

ChatGPTClaudeCursorPerplexityGeminiMicrosoft CopilotRaycastMeta AI

AIが仕事をこなします。私たちが安全に守ります。

他のAIツールではこれは手に入りません。ワークフローはお気に入りのクライアントで動き、アカウントは守られ、エージェントに何を許すかはあなたが決めます。これこそ乗り換えるべき理由です。

すべてのConnectorは当社のインフラストラクチャの中、あなたのワークフローが動くのと同じ場所にあります。下の3つはすでにその一部で、背景で静かに働き、あなたが意識する必要がないようにしてくれます。追加するものも、設定するものも、心配することもありません。

A futuristic MCP client docking bay
V8 Isolate01

各Connectorは独自の密閉された環境内で実行されます。

各Connectorは独自の封印されたV8ランタイムで実行され、ファイル、システム、他のサーバーへのアクセスはありません。Connectorが自身のリクエストを超えて中身を見ることはありません。

Kill Switch02

1つのスイッチで全エージェントを停止。即座に。

1つのアクションで全Connectorを無効化し、全トークンを失効させ、全セッションを終了します。AI Governanceが記録を保持します。

ユーザーごとのFinOps03

驚きではなく、一時停止する支出制限。

各ユーザーは自身の接続と認証情報を持ち、他から隔離されています。支出制限を超える操作は課金されず、あなたの承認を待ちます。

3つのコントロールが、AIが接続するレイヤーに 組み込まれています。

厳選セット · 4機能

届けるのは、本当に必要な動作だけです。

機能セット01 / 01

01-04

このセットには4機能あります。

Strain-Counterstrain Protocolで使える4機能の一部です。

  1. 01

    保持パラメータの算出

    保持フェーズにおいて必要な正確な持続時間とモニタリング頻度を算出します。

  2. 02

    プロトコルの生成

    特定のテンダーポイントに対する、ステップバイステップの完全な治療プロトコルを生成します。

  3. 03

    再評価戦略の取得

    治療の保持フェーズ終了後、施術者がどのように患者を再評価すべきかを決定します。

  4. 04

    安楽位の妥当性確認

    提案された安楽位(Position of Comfort)が解剖学的に妥当であるかを確認します。

実際の業務

チームが実際に回している作業

01

Rapid Protocol Creation

A practitioner identifies a tender point and immediately gets a full treatment plan from their AI client.

02

Position Verification

You check if a specific flexion or rotation position is appropriate for a patient's specific tender point.

03

Treatment Timing

The MCP determines how long a patient should stay in a position of comfort based on the protocol.

04

Outcome Assessment

You use the reassessment strategy to determine if the tender point sensitivity has actually decreased.

1つのConnector、すべてのAI

Strain-Counterstrain Protocolは、最も人気のあるAIクライアントで動きます。

これは最も人気のあるクライアントで、それぞれにステップバイステップのガイドがあります。リンクは1つ、設定は一度、ガバナンスと可視性は最初から組み込み。しかもすべてMCP標準で動くため、同じ接続は他の対応クライアントでもそのまま使えます。作り直す必要はありません。

自社アプリを作っていますか?Connectorはあなたのもの。

Strain-Counterstrain Protocolを働かせるのにクライアントは不要です。同じホストされた接続が、あなたのアプリやエージェントのコードにそのまま組み込め、すべてのリクエストに同じガバナンスが適用されます。作るのも、会話するのも、1つの接続で両方。

実測値、推定値ではない

平均896ms。本番環境で高速。

Strain-Counterstrain Protocolは本番サービスに対して毎日チェックされています。

日次平均最大1177ms
10月3日今日
最速日
735ms
最遅日
1177ms
14日間の傾向
遅延傾向+23%

クライアントを接続

1つのURL。すべてのクライアント。

Connectorを有効化し、リンクをコピーして、いつも使うクライアントに貼り付けるだけ。4個の機能がすぐに使えます。

プレビューアクセス · プロバイダー認証ではありません

vk_preview_* トークンは Vinkius のプレビューインフラに属します。Claude が Strain-Counterstrain Protocol のケイパビリティを検出して表示できるようにし、AI の中でその体験を確認できます。

このトークンは Strain-Counterstrain Protocol のアカウントを認証するものではありません。認証情報や実際のアカウントデータが必要なアクションは、Connector を有効化してサービスを承認するまで実行されない場合があります。

Strain-Counterstrain Protocol Connector

準備完了です。MCPクライアントを選択し、セットアップ手順に従ってください。

コネクタリンクhttps://edge.vinkius.com/vk_preview_vxOZjLllLB9DBcAX4YgSCBc2JNSeFkkOSiJjxqxw/mcp

Claude Desktop

以下の手順で数秒で接続できます。

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Strain-Counterstrain Protocol capabilities are ready to use.
設定 · claude_desktop_config.jsonコピー
{
  "mcpServers": {
    "strain-counterstrain-protocol-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_vxOZjLllLB9DBcAX4YgSCBc2JNSeFkkOSiJjxqxw/mcp"
    }
  }
}
  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

各クライアントの手順ガイドはこちらです。 接続方法

Claude向けのガイド付きセットアップ? Strain-Counterstrain ProtocolをClaudeや他のAIに設定する

このConnectorが対応するすべてのAIクライアントを見る ↑

対象ユーザー

Strain-Counterstrain Protocolユーザーが任せたい仕事のために。

Jones Counterstrain技法を用いる理学療法士やカイロプラクターなどの専門家を対象としています。臨床現場での意思決定を迅速化し、治療の標準化を図りたい方に最適です。

  • 01

    理学療法士

    神経筋治療のプロトコル作成と、正確な保持時間の管理に活用できます。

  • 02

    カイロプラクター

    テンダーポイントに基づいた安楽位の算出と、治療後の再評価プロセスを効率化します。

  • 03

    臨床研究者

    標準化された治療プロトコルの生成と、解剖学的妥当性の検証に利用可能です。

FAQ

Strain-Counterstrain Protocolユーザーからのよくある質問。

  • 01

    What is the Strain-Counterstrain Protocol MCP?

    It is a clinical decision support capability that uses Jones Counterstrain methodology to help practitioners plan neuromuscular treatments.

  • 02

    Which AI clients can I use with this MCP?

    You can use this MCP with any compatible client like Claude, Cursor, Windsurf, or VS Code.

  • 03

    Can this MCP help me verify patient positioning?

    Yes, the validate_poc_viability capability checks if a proposed Position of Comfort is anatomically logical.

  • 04

    Does it provide timing for the treatment hold?

    Yes, the calculate_hold_parameters capability provides the precise duration and monitoring frequency required for the hold phase.

  • 05

    How do I know if the treatment worked?

    The get_reassessment_strategy capability provides a plan for how to re-evaluate the patient after the hold is complete.

  • 06

    How do I generate a full treatment plan?

    You can use the generate_protocol capability by providing the tender point location, the associated joint, and the client's comfort level.

  • 07

    Can I verify if a position is correct for a specific tender point?

    Yes, use the validate_poc_viability capability to check if a proposed position of comfort is anatomically logical for the given tender point and joint.

  • 08

    How is the hold duration determined?

    The duration is calculated using calculate_hold_parameters, which takes into account the intensity of the dysfunction and the patient's age.

『Strain-Counterstrain Protocol』を Claude、Cursor、ChatGPT などに接続