An astronaut overseeing a futuristic data hub

Us Airport Weather SentinelをAIに接続

一度設定すれば、ChatGPT、Claude、Cursorなど、お気に入りのクライアントでどれでも動きます。すべては裏側で安全に動くので、あなたは安心して本当に大切なことに集中できます。空港の気象状況と警報をリアルタイムに把握する

このConnectorについてAIに質問

Vinkiusが開発・運用・ホスティング。

MCP認証済み · 本番環境対応 · Vinkius保証

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

ChatGPTClaudeCursorPerplexityGeminiMicrosoft CopilotRaycastMeta AI

AIが仕事をこなします。私たちが安全に守ります。

他のAIツールではこれは手に入りません。ワークフローはお気に入りのクライアントで動き、アカウントは守られ、エージェントに何を許すかはあなたが決めます。これこそ乗り換えるべき理由です。

すべてのConnectorは当社のインフラストラクチャの中、あなたのワークフローが動くのと同じ場所にあります。下の3つはすでにその一部で、背景で静かに働き、あなたが意識する必要がないようにしてくれます。追加するものも、設定するものも、心配することもありません。

A futuristic MCP client docking bay
V8 Isolate01

各Connectorは独自の密閉された環境内で実行されます。

各Connectorは独自の封印されたV8ランタイムで実行され、ファイル、システム、他のサーバーへのアクセスはありません。Connectorが自身のリクエストを超えて中身を見ることはありません。

Kill Switch02

1つのスイッチで全エージェントを停止。即座に。

1つのアクションで全Connectorを無効化し、全トークンを失効させ、全セッションを終了します。AI Governanceが記録を保持します。

ユーザーごとのFinOps03

驚きではなく、一時停止する支出制限。

各ユーザーは自身の接続と認証情報を持ち、他から隔離されています。支出制限を超える操作は課金されず、あなたの承認を待ちます。

3つのコントロールが、AIが接続するレイヤーに 組み込まれています。

厳選セット · 6機能

届けるのは、本当に必要な動作だけです。

機能セット01 / 02

01-03

このセットには3機能あります。

National Weather Serviceで使える6機能の一部です。

  1. 01

    空港の現在の状況を確認

    米国の空港における現在の気象状況と、発令中のNWS警報を取得します。移動前の最初の確認に最適です。

  2. 02

    特定の警報を監視

    洪水、強風、雷、冬の嵐、竜巻、ハリケーンなどの特定の警報を指定して監視できます。該当する警報がない場合は、現在そのゾーンに警報がないことを示します。

  3. 03

    警報の差分をチェック

    前回の確認時からの新しい警報や、期限が切れた警報の差分のみを取得します。効率的な継続監視が可能です。

機能セット02 / 02

04-06

このセットには3機能あります。

National Weather Serviceで使える6機能の一部です。

  1. 04

    気象条件の変化を検知

    気温、風速、視界などの観測データの中で、前回確認時から変化があった項目のみを抽出して報告します。

  2. 05

    空港コードを検索

    IATAコード、ICAOコード、都市名、または空港名の一部を使用して、対象となる空港を特定します。

  3. 06

    複数空港の状況をまとめて確認

    最大3つの空港の現在の状況を一度の呼び出しでまとめて取得し、各空港のステータスを簡潔に表示します。

実際の業務

チームが実際に回している作業

01

Pre-flight Check

Ask your agent for a full airport status report to see if visibility or wind will impact your departure.

02

Continuous Monitoring

Set your agent to check for delta changes in weather conditions every few minutes.

03

Alert Watchlisting

Focus your agent on specific weather threats like Winter Storm Warnings for a specific region.

04

Corridor Scanning

Check the status of three different airports along a flight route in one command.

1つのConnector、すべてのAI

National Weather Serviceは、最も人気のあるAIクライアントで動きます。

これは最も人気のあるクライアントで、それぞれにステップバイステップのガイドがあります。リンクは1つ、設定は一度、ガバナンスと可視性は最初から組み込み。しかもすべてMCP標準で動くため、同じ接続は他の対応クライアントでもそのまま使えます。作り直す必要はありません。

自社アプリを作っていますか?Connectorはあなたのもの。

National Weather Serviceを働かせるのにクライアントは不要です。同じホストされた接続が、あなたのアプリやエージェントのコードにそのまま組み込め、すべてのリクエストに同じガバナンスが適用されます。作るのも、会話するのも、1つの接続で両方。

実測値、推定値ではない

平均888ms。本番環境で高速。

National Weather Serviceは本番サービスに対して毎日チェックされています。

日次平均最大1021ms
10月3日今日
最速日
800ms
最遅日
1021ms
14日間の傾向
遅延傾向+7%

クライアントを接続

1つのURL。すべてのクライアント。

Connectorを有効化し、リンクをコピーして、いつも使うクライアントに貼り付けるだけ。6個の機能がすぐに使えます。

プレビューアクセス · プロバイダー認証ではありません

vk_preview_* トークンは Vinkius のプレビューインフラに属します。Claude が National Weather Service のケイパビリティを検出して表示できるようにし、AI の中でその体験を確認できます。

このトークンは National Weather Service のアカウントを認証するものではありません。認証情報や実際のアカウントデータが必要なアクションは、Connector を有効化してサービスを承認するまで実行されない場合があります。

National Weather Service Connector

準備完了です。MCPクライアントを選択し、セットアップ手順に従ってください。

コネクタリンクhttps://edge.vinkius.com/vk_preview_ZdrZHqXg8XNnQGjdphhjeaC6hRhbVasIygU5q5HU/mcp

Claude Desktop

以下の手順で数秒で接続できます。

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — National Weather Service capabilities are ready to use.
設定 · claude_desktop_config.jsonコピー
{
  "mcpServers": {
    "us-airport-weather-sentinel-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_ZdrZHqXg8XNnQGjdphhjeaC6hRhbVasIygU5q5HU/mcp"
    }
  }
}
  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

各クライアントの手順ガイドはこちらです。 接続方法

Claude向けのガイド付きセットアップ? National Weather ServiceをClaudeや他のAIに設定する

このConnectorが対応するすべてのAIクライアントを見る ↑

対象ユーザー

National Weather Serviceユーザーが任せたい仕事のために。

This MCP is built for anyone needing reliable, automated weather intelligence for US aviation hubs.

  • 01

    Frequent Travelers

    Use your agent to monitor for weather disruptions without checking multiple websites.

  • 02

    Logistics Dispatchers

    Hand off multi-airport monitoring to an agent that flags wind or visibility issues.

  • 03

    Automation Developers

    Build scheduled weather pulses that trigger only when specific NWS alerts are issued.

FAQ

National Weather Serviceユーザーからのよくある質問。

  • 01

    Do I need an API key for the National Weather Service?

    No. This MCP uses the public NWS API, so there are no credentials or accounts required to use it.

  • 02

    How many airports can I check at once?

    You can check up to three US airports in a single call using the watch_status capability.

  • 03

    How does the delta feature work?

    You provide a timestamp from your previous check, and the MCP returns only the new alerts or weather changes that occurred after that time.

  • 04

    Can I filter for specific types of weather warnings?

    Yes. You can use the alert_watch capability to monitor specific event types like TornadoWarnings or FloodWarnings.

  • 05

    What happens if the airport station feed is empty?

    If the station feed is momentarily empty, the conditions field may return null.

  • 06

    Do I need credentials?

    No. The National Weather Service API is public and requires no key, no account, no signup. Anonymous access is rate-limited to roughly 30 requests per minute, which is why batched calls are capped at 3 airports and the capabilities keep their fetch count low.

  • 07

    How do the "since" delta capabilities work?

    The server is stateless. Call airport_status (or any delta capability), keep the as_of timestamp in the agent's context, and on the next check pass it as since. The capability fetches the recent observations/alerts and returns only what is newer than that timestamp. e.g. new alerts, gusts above 39 km/h, visibility drops. The station feed keeps ~50 most recent observations, so a baseline older than that window comes back as "no observations since X" with a note.

  • 08

    Which airports are supported?

    The major US commercial airports (roughly 45): JFK, LGA, EWR, BOS, IAD, ATL, ORD, DFW, AUS, DEN, SEA, SFO, LAX, SNA, PHX, LAS, SLC, MCO, MIA, FLL, TPA, MSY, STL, DTW, BNA, MEM, CHS, CLT, RDU, GSP, OAK, PDX, GEG, RNO, ONT, SAN, HNL and more. find_airports lists the exact supported codes; the airport code resolves to its NWS forecast zone and METAR station automatically.

  • 09

    Why can't I filter alerts by state or time?

    The NWS API's 2026 revision dropped the state/sent/since query parameters. the server resolves your airport to its NWS forecast zone and filters time deltas client-side from the timestamps each alert carries. So you always filter by the airport (zone) and by since, which is what a traveler cares about anyway.

『National Weather Service』を Claude、Cursor、ChatGPT などに接続