Concrete Volume Calculator Connector for AI agents.
5 live capabilities
Get precise concrete volume and bag counts for construction projects.
Waiting for input…
Why people use Concrete Volume Calculator
Concrete Volume Calculator for Accurate Construction Estimating
This Connector takes the math out of the equation. You just tell your agent the dimensions of your slab, stairs, or columns, and it gives you the total volume in both cubic meters and cubic yards. It even handles the annoying part of figuring out how many bags you need to grab from the store, whether they're 40lb, 60lb, 80lb, 25kg, or 50kg. It factors in a waste percentage for those uneven spots or spillage so you don't end up short on the day of the pour.
What Vinkius changes
You get precise material orders and bag counts without doing manual math.
Use it from Claude, ChatGPT, Cursor or another AI client you already have.
One account · 6,100+ Connectors
- Real-world use case 01
Estimating a backyard patio
A contractor needs a quote for a 20x20 slab.
- Real-world use case 02
Ordering for a curved driveway
A homeowner asks for the volume of a 50ft long arched driveway.
- Real-world use case 03
Calculating column supports
A site foreman needs to know how many bags of concrete are needed for a 4ft tall square column.
Complete set · 5capabilities
The complete Concrete Volume Calculator capability set.
These are the exact actions your AI can choose when you ask it to work with Concrete Volume Calculator.
01—03
3 capabilities in this set.
Part of 5 available through Concrete Volume Calculator.
- 01 Capability
Calculate curved path volume
Handles the math for arched or circular drives. Use this for non-linear paths like curved walkways.
- 02 Capability
Calculate footing volume
Calculates requirements for rectangular or trapezoidal footings. It's essential for getting foundation depths right.
- 03 Capability
Calculate slab volume
Determines the volume for flat floor or foundation slabs. This is your go-to for standard flat surfaces.
04—05
2 capabilities in this set.
Part of 5 available through Concrete Volume Calculator.
- 04 Capability
Calculate stair volume
Figures out the concrete needed for a flight of steps. It handles the complex geometry of stairs easily.
- 05 Capability
Calculate column volume
Finds the volume for round or square columns. It helps you get the right amount of concrete for vertical supports.
Set up in minutes
One URL. Then ask Concrete Volume Calculator to work.
Claude and ChatGPT only need the Connector URL. Copy it once, add it in settings, and use Concrete Volume Calculator from the conversation.
Choose your client
Live previewAdvanced clients IDE · CLI
Claude · Web + desktop
Connector URL · ready to paste
Streamable HTTPhttps://edge.vinkius.com/vk_preview_wxFTT1boZzQdGABALQRRhqdpGG1VLKmKGXRo2bYT/mcp - Step 01
Open Connectors
In Claude Web or Claude Desktop, open Settings and choose Connectors.
- Step 02
Add the URL
Choose Add custom connector, name it Concrete Volume Calculator, and paste the URL above.
- Step 03
Turn it on in chat
Select +, open Connectors, and enable Concrete Volume Calculator for the conversation.
ChatGPT · Web + desktop
Connector URL · ready to paste
Streamable HTTPhttps://edge.vinkius.com/vk_preview_wxFTT1boZzQdGABALQRRhqdpGG1VLKmKGXRo2bYT/mcp - Step 01
Open MCP settings
On desktop, open Settings and MCP servers. On web, open your workspace app or connector settings.
- Step 02
Add the URL
Choose Add server with Streamable HTTP, or create a custom MCP app, then paste the Concrete Volume Calculator URL.
- Step 03
Save and start
Save the connection and enable Concrete Volume Calculator in your conversation. Desktop may ask you to restart once.
Cursor · IDE configuration
Advanced setup
{
"mcpServers": {
"concrete-volume-calculator": {
"url": "https://edge.vinkius.com/vk_preview_wxFTT1boZzQdGABALQRRhqdpGG1VLKmKGXRo2bYT/mcp"
}
}
}- Step 01
Open MCP Settings
Press Cmd+Shift+P (macOS) or Ctrl+Shift+P (Windows/Linux) → search "MCP Settings"
- Step 02
Add the server config
Paste the JSON configuration above into the mcp.json file that opens
- Step 03
Save the file
Cursor will automatically detect the new Connector
- Step 04
Start using Concrete Volume Calculator
Open Agent mode in chat and ask: "Using Concrete Volume Calculator, help me...". 5 tools available
VS Code Copilot · IDE configuration
Advanced setup
{
"mcpServers": {
"concrete-volume-calculator": {
"url": "https://edge.vinkius.com/vk_preview_wxFTT1boZzQdGABALQRRhqdpGG1VLKmKGXRo2bYT/mcp"
}
}
}- Step 01
Create MCP config
Create a .vscode/mcp.json file in your project root
- Step 02
Add the server config
Paste the JSON configuration above
- Step 03
Enable Agent mode
Open GitHub Copilot Chat and switch to Agent mode using the dropdown
- Step 04
Start using Concrete Volume Calculator
Ask Copilot: "Using Concrete Volume Calculator, help me...". 5 tools available
Windsurf · IDE configuration
Advanced setup
{
"mcpServers": {
"concrete-volume-calculator": {
"url": "https://edge.vinkius.com/vk_preview_wxFTT1boZzQdGABALQRRhqdpGG1VLKmKGXRo2bYT/mcp"
}
}
}- Step 01
Open MCP Settings
Go to Settings → MCP Configuration or press Cmd+Shift+P and search "MCP"
- Step 02
Add the server
Paste the JSON configuration above into mcp_config.json
- Step 03
Save and reload
Windsurf will detect the new server automatically
- Step 04
Start using Concrete Volume Calculator
Open Cascade and ask: "Using Concrete Volume Calculator, help me...". 5 tools available
Cline · IDE configuration
Advanced setup
{
"mcpServers": {
"concrete-volume-calculator": {
"url": "https://edge.vinkius.com/vk_preview_wxFTT1boZzQdGABALQRRhqdpGG1VLKmKGXRo2bYT/mcp"
}
}
}- Step 01
Open Cline MCP Settings
Click the Connectors icon in the Cline sidebar panel
- Step 02
Add remote server
Click "Add Connector" and paste the configuration above
- Step 03
Enable the server
Toggle the server switch to ON
- Step 04
Start using Concrete Volume Calculator
Ask Cline: "Using Concrete Volume Calculator, help me...". 5 tools available
Claude Code · Terminal command
Advanced setup
claude mcp add concrete-volume-calculator --transport http "https://edge.vinkius.com/vk_preview_wxFTT1boZzQdGABALQRRhqdpGG1VLKmKGXRo2bYT/mcp"- Step 01
Install Claude Code
Run npm install -g @anthropic-ai/claude-code if not already installed
- Step 02
Add the Connector
Run the command above in your terminal
- Step 03
Verify the connection
Run claude mcp to list connected servers, or type /mcp inside a session
- Step 04
Start using Concrete Volume Calculator
Ask Claude: "Using Concrete Volume Calculator, show me...". 5 tools are ready
Where the request belongs
Work Concrete Volume Calculator can move forward.
This is for construction professionals and DIYers who need to avoid ordering too much or too little concrete for a pour.
Construction Estimator
They use this to quickly run numbers for foundation footings and stairs to provide accurate bids to clients.
General Contractor
They use it on-site to verify material orders for slabs and columns to ensure the crew doesn't run out of mix.
Homeowner/DIYer
They use it to figure out how many bags of concrete to buy from the hardware store for a backyard patio or driveway.
Build the capability set
Add more capabilities.
Each Connector adds new actions and data without changing how you work.
Browse Connectors
Concrete Yardage Calculator
Calculate concrete volume, 80lb bag requirements, and regional cost estimates for slabs, footings, walls, and columns.
Concrete Material Calculator
Estimate concrete volume, bag quantities, costs, and rebar requirements for any project.
Masonry Quantity Calculator
Calculate the number of masonry units, mortar volume, and required cement and sand for wall construction.
Slab Thickness Estimator
Estimate minimum concrete slab thickness based on span and construction type.
Beam Span Estimator
Quickly estimate concrete beam dimensions and compare with steel profiles.
Floor Material Calculator
Calculate the exact amount of tiles, wood, or porcelain needed for your flooring project.
Bring your own AI
Change the model, client or framework. Keep Concrete Volume Calculator connected.
-
Claude -
ChatGPT -
Gemini -
Cursor -
VS Code -
Windsurf -
ZCode -
Cline -
Zed -
Continue -
Kiro -
Roo Code -
Zencoder -
Goose -
Void -
Augment Code -
Amp -
Qodo -
Tabnine -
Pieces -
Sourcegraph Cody -
JetBrains -
Warp -
Amazon Q -
Antigravity -
BoltAI -
Raycast -
Jan -
LM Studio -
AnythingLLM -
Open WebUI -
Msty -
Cherry Studio -
LibreChat -
TypingMind -
Chorus -
5ire -
n8n -
LangChain -
LlamaIndex -
CrewAI -
Vercel AI SDK
Before you connect
Questions about Concrete Volume Calculator.
The practical details behind the request, access and result.
Can the Concrete Volume Calculator MCP help me order the right amount of concrete?
Yes, it calculates exact volumes for slabs, stairs, and footings. This helps you order the right amount of mix to avoid running short or over-ordering.
How does the Concrete Volume Calculator MCP handle waste?
You can include a waste factor when asking for a calculation. This accounts for spillage, uneven ground, or material lost during the pour.
Does the Concrete Volume Calculator MCP work for curved driveways?
Yes, it has a specific capability for curved paths. You can get volume totals for arched or circular driveway designs easily.
Can I get bag counts for different weights?
Yes, the Connector provides the number of bags required for 40lb, 60lb, 80lb, 25kg, and 50kg bags in a single calculation.
Is the Concrete Volume Calculator MCP good for estimating construction bids?
It's excellent for estimating. You can quickly get volume totals for various structures to provide accurate quotes to your clients.
Can the Concrete Volume Calculator MCP calculate volume for stairs?
Yes, it includes a capability specifically for flights of steps. It handles the geometry of stairs so you don't have to do the manual math.
What types of structures can I calculate?
You can calculate concrete requirements for slabs, rectangular or trapezoidal footings, round or square columns, flights of stairs, and curved paths.
Does the capability account for waste?
The wasteFactor parameter allows you to add a percentage (e.g., 0.05 for 5%) to ensure you have enough material.
What units are supported?
The capability supports both metric and imperial unit systems. All results are highly accurate and provided in both cubic meters (m³) and cubic yards (yd³).
One connection away
Give your agent a direct line to Concrete Volume Calculator.
Connect Concrete Volume Calculator once. Keep it beside 6,100+ managed Connectors when the next task needs more.
Explore every Connector No credit card required · Free tier available