Can my agent confirm if an international number is reachable via Clickatell?

Yes. Use the 'test_carrier_coverage' tool. Provide the destination number in international format, and the agent will check Clickatell's network traces to confirm if the route is active and supported.

How do I monitor my remaining SMS credits through the agent?

Ask your agent to get the account balance. It retrieves the explicit funding limits from your Clickatell profile, helping you prevent zero-balance halts during critical messaging flows.

Can I automate replies based on incoming keywords?

Absolutely. You can use the 'upsert_inbound_rule' tool to define keyword triggers and webhook URLs. This allows your agent to configure automated two-way communication schemas without manually editing portal settings.

Clickatell MCP Server for CrewAI 10 tools — connect in under 2 minutes

Name: Clickatell
Availability: InStock
Author: Vinkius

docs.crewai.com/mcp/overview

Built by Vinkius GDPR 10 Tools Framework

Connect your CrewAI agents to Clickatell through Vinkius, pass the Edge URL in the `mcps` parameter and every Clickatell tool is auto-discovered at runtime. No credentials to manage, no infrastructure to maintain.

Get MCP Server for AI Agents

ASK AI ABOUT THIS MCP SERVER

Open in ChatGPT Open in Claude Open in Perplexity

Vinkius supports streamable HTTP and SSE.

python

from crewai import Agent, Task, Crew

agent = Agent(
    role="Clickatell Specialist",
    goal="Help users interact with Clickatell effectively",
    backstory=(
        "You are an expert at leveraging Clickatell tools "
        "for automation and data analysis."
    ),
    # Your Vinkius token. get it at cloud.vinkius.com
    mcps=["https://edge.vinkius.com/[YOUR_TOKEN_HERE]/mcp"],
)

task = Task(
    description=(
        "Explore all available tools in Clickatell "
        "and summarize their capabilities."
    ),
    agent=agent,
    expected_output=(
        "A detailed summary of 10 available tools "
        "and what they can do."
    ),
)

crew = Crew(agents=[agent], tasks=[task])
result = crew.kickoff()
print(result)

Fully ManagedVinkius Servers

60%Token savings

High SecurityEnterprise-grade

IAMAccess control

EU AI ActCompliant

DLPData protection

V8 IsolateSandboxed

Ed25519Audit chain

<40msKill switch

Stream every event to Splunk, Datadog, or your own webhook in real-time

* Every MCP server runs on Vinkius-managed infrastructure inside AWS - a purpose-built runtime with per-request V8 isolates, Ed25519 signed audit chains, and sub-40ms cold starts optimized for native MCP execution. See our infrastructure

About Clickatell MCP Server

Connect your Clickatell account to any AI agent and take full control of your global mobile messaging workflows through natural conversation.

When paired with CrewAI, Clickatell becomes a first-class tool in your multi-agent workflows. Each agent in the crew can call Clickatell tools autonomously, one agent queries data, another analyzes results, a third compiles reports, all orchestrated through Vinkius with zero configuration overhead.

What you can do

SMS Dispatch — Send single or bulk SMS messages natively with support for E.164 formatting and Unicode payloads
Delivery Tracking — Perform structural extraction of properties driving final carrier statuses to confirm your messages reached cellular towers
Account Management — Monitor your available API balance and check international network coverage for specific numbers
Campaign Monitoring — List scheduled text blasts and audit delivery timings strictly within Clickatell limits
Inbound Reply Rules — Create and manage keyword-based reply rules and webhooks to automate two-way messaging flows

The Clickatell MCP Server exposes 10 tools through the Vinkius. Connect it to CrewAI in under two minutes — no API keys to rotate, no infrastructure to provision, no vendor lock-in. Your configuration, your data, your control.

How to Connect Clickatell to CrewAI via MCP

Follow these steps to integrate the Clickatell MCP Server with CrewAI.

Install CrewAI

Run pip install crewai

Replace the token

Replace [YOUR_TOKEN_HERE] with your Vinkius token from cloud.vinkius.com

Customize the agent

Adjust the role, goal, and backstory to fit your use case

Run the crew

Run python crew.py. CrewAI auto-discovers 10 tools from Clickatell

Why Use CrewAI with the Clickatell MCP Server

CrewAI Multi-Agent Orchestration Framework provides unique advantages when paired with Clickatell through the Model Context Protocol.

Multi-agent collaboration lets you decompose complex workflows into specialized roles, one agent researches, another analyzes, a third generates reports, each with access to MCP tools

CrewAI's native MCP integration requires zero adapter code: pass Vinkius Edge URL directly in the `mcps` parameter and agents auto-discover every available tool at runtime

Built-in task delegation and shared memory mean agents can pass context between steps without manual state management, enabling multi-hop reasoning across tool calls

Sequential and hierarchical crew patterns map naturally to real-world workflows: enumerate subdomains → analyze DNS history → check WHOIS records → compile findings into actionable reports

Clickatell + CrewAI Use Cases

Practical scenarios where CrewAI combined with the Clickatell MCP Server delivers measurable value.

Automated multi-step research: a reconnaissance agent queries Clickatell for raw data, then a second analyst agent cross-references findings and flags anomalies. all without human handoff

Scheduled intelligence reports: set up a crew that periodically queries Clickatell, analyzes trends over time, and generates executive briefings in markdown or PDF format

Multi-source enrichment pipelines: chain Clickatell tools with other MCP servers in the same crew, letting agents correlate data across multiple providers in a single workflow

Compliance and audit automation: a compliance agent queries Clickatell against predefined policy rules, generates deviation reports, and routes findings to the appropriate team

Clickatell MCP Tools for CrewAI (10)

These 10 tools become available when you connect Clickatell to CrewAI via MCP:

cancel_queued_message

Irreversibly vaporize explicit SMS blocks deleting scheduled drops

dispatch_bulk_sms

164 boundaries optimizing Clickatell pipeline bandwidth directly avoiding API lag. Identify bounded routing spaces bridging concurrent SMS arrays

dispatch_sms_message

164 natively. Provision a massively scalable JSON Payload rendering outbound SMS natively over Clickatell

get_account_balance

Retrieve explicit Cloud metrics tracing active Funding Limits

get_delivery_status

Perform structural extraction of properties driving final Carrier statuses

list_inbound_rules

Enumerate explicitly attached structured rules traversing MO bounds

list_scheduled_campaigns

Identify precise active arrays spanning Marketing boundaries

test_carrier_coverage

Dispatch an automated validation check routing MSISDN routes

upsert_inbound_rule

Bootstrap an entirely empty structural parsing block allocating Webhooks

wipe_inbound_rule

Obliterate mapped HTTP Logic bounds avoiding legacy routing

Example Prompts for Clickatell in CrewAI

Ready-to-use prompts you can give your CrewAI agent to start working with Clickatell immediately.

"Send SMS to +1234567890: 'Your order #987 is ready for pickup!'"

"What is my current Clickatell account balance?"

"Check delivery status for message ID msg_789"

Troubleshooting Clickatell MCP Server with CrewAI

Common issues when connecting Clickatell to CrewAI through the Vinkius, and how to resolve them.

MCP tools not discovered

Ensure the Edge URL is correct. CrewAI connects lazily when the crew starts. check console output.

Agent not using tools

Make the task description specific. Instead of "do something", say "Use the available tools to list contacts".

Timeout errors

CrewAI has a 10s connection timeout by default. Ensure your network can reach the Edge URL.

Rate limiting or 429 errors

Vinkius enforces per-token rate limits. Check your subscription tier and request quota in the dashboard. Upgrade if you need higher throughput.

Clickatell + CrewAI FAQ

Common questions about integrating Clickatell MCP Server with CrewAI.

How does CrewAI discover and connect to MCP tools?

CrewAI connects to MCP servers lazily. when the crew starts, each agent resolves its MCP URLs and fetches the tool catalog via the standard tools/list method. This means tools are always fresh and reflect the server's current capabilities. No tool schemas need to be hardcoded.

Can different agents in the same crew use different MCP servers?

Yes. Each agent has its own mcps list, so you can assign specific servers to specific roles. For example, a reconnaissance agent might use a domain intelligence server while an analysis agent uses a vulnerability database server.

What happens when an MCP tool call fails during a crew run?

CrewAI wraps tool failures as context for the agent. The LLM receives the error message and can decide to retry with different parameters, fall back to a different tool, or mark the task as partially complete. This resilience is critical for production workflows.

Can CrewAI agents call multiple MCP tools in parallel?

CrewAI agents execute tool calls sequentially within a single reasoning step. However, you can run multiple agents in parallel using process=Process.parallel, each calling different MCP tools concurrently. This is ideal for workflows where separate data sources need to be queried simultaneously.

Can I run CrewAI crews on a schedule (cron)?

Yes. CrewAI crews are standard Python scripts, so you can invoke them via cron, Airflow, Celery, or any task scheduler. The crew.kickoff() method runs synchronously by default, making it straightforward to integrate into existing pipelines.