Google Roads MCP Server for Claude Code 4 tools — connect in under 2 minutes
Claude Code is Anthropic's agentic CLI for terminal-first development. Add Google Roads as an MCP server in one command and Claude Code will discover every tool at runtime. ideal for automation pipelines, CI/CD integration, and headless workflows via Vinkius.
ASK AI ABOUT THIS MCP SERVER
Vinkius supports streamable HTTP and SSE.
Vinkius Desktop App
The modern way to manage MCP Servers — no config files, no terminal commands. Install Google Roads and 2,500+ MCP Servers from a single visual interface.
# Your Vinkius token. get it at cloud.vinkius.com
claude mcp add google-roads --transport http "https://edge.vinkius.com/[YOUR_TOKEN_HERE]/mcp"
* Every MCP server runs on Vinkius-managed infrastructure inside AWS - a purpose-built runtime with per-request V8 isolates, Ed25519 signed audit chains, and sub-40ms cold starts optimized for native MCP execution. See our infrastructure
About Google Roads MCP Server
Connect your Google Roads API to any AI agent and take full control of GPS map matching, road segment identification, and speed limit data retrieval through natural conversation.
Claude Code registers Google Roads as an MCP server in a single terminal command. Once connected, Claude Code discovers all 4 tools at runtime and can call them headlessly. ideal for CI/CD pipelines, cron jobs, and automated workflows where Google Roads data drives decisions without human intervention.
What you can do
- Snap to Roads — Match GPS coordinate paths to the most likely roads travelled with interpolated points for smooth road geometry
- Nearest Roads — Find the nearest road segment for up to 100 individual GPS coordinates independently
- Speed Limits — Get posted speed limit data for specific road segments using place IDs from road matching
- Snapped Speed Limits — Snap GPS coordinates to roads AND get speed limits in a single combined request
- Place ID Mapping — Obtain Google place IDs for road segments that can be used with other Google Maps APIs
- Fleet Tracking — Clean noisy GPS traces from fleet vehicles for accurate route visualization
- GPS Correction — Convert raw GPS points into accurate road-level positions for mapping applications
The Google Roads MCP Server exposes 4 tools through the Vinkius. Connect it to Claude Code in under two minutes — no API keys to rotate, no infrastructure to provision, no vendor lock-in. Your configuration, your data, your control.
How to Connect Google Roads to Claude Code via MCP
Follow these steps to integrate the Google Roads MCP Server with Claude Code.
Install Claude Code
Run npm install -g @anthropic-ai/claude-code if not already installed
Add the MCP Server
Run the command above in your terminal
Verify the connection
Run claude mcp to list connected servers, or type /mcp inside a session
Start using Google Roads
Ask Claude: "Using Google Roads, show me...". 4 tools are ready
Why Use Claude Code with the Google Roads MCP Server
Claude Code provides unique advantages when paired with Google Roads through the Model Context Protocol.
Single-command setup: `claude mcp add` registers the server instantly. no config files to edit or applications to restart
Terminal-native workflow means MCP tools integrate seamlessly into shell scripts, CI/CD pipelines, and automated DevOps tasks
Claude Code runs headlessly, enabling unattended batch processing using Google Roads tools in cron jobs or deployment scripts
Built by the same team that created the MCP protocol, ensuring first-class compatibility and the fastest adoption of new protocol features
Google Roads + Claude Code Use Cases
Practical scenarios where Claude Code combined with the Google Roads MCP Server delivers measurable value.
CI/CD integration: embed Google Roads tool calls in your deployment pipeline to validate configurations or fetch secrets before shipping
Headless batch processing: schedule Claude Code to query Google Roads nightly and generate reports without human intervention
Shell scripting: pipe Google Roads outputs into other CLI tools for data transformation, filtering, and aggregation
Infrastructure monitoring: run Claude Code in a cron job to query Google Roads status endpoints and alert on anomalies
Google Roads MCP Tools for Claude Code (4)
These 4 tools become available when you connect Google Roads to Claude Code via MCP:
get_nearest_roads
Returns the snapped coordinate, the original coordinate, and the place ID for each nearest road segment. Unlike snapToRoads which assumes coordinates form a continuous path, nearestRoads treats each point independently. Essential for reverse geocoding, finding which road a vehicle is on, identifying road segments for individual location points, and mapping scattered GPS points to roads. Each point is matched to the nearest road segment within a reasonable distance. Place IDs can be used with the speed limits endpoint. AI agents should reference this when users ask "what road is at these coordinates", "find the nearest road for each GPS point", or need to map individual location points to road segments without assuming a path. Get the nearest road segments for up to 100 individual GPS coordinates
get_snapped_speed_limits
Snaps GPS coordinates to the nearest road segments and returns both the snapped coordinates with place IDs AND the speed limits for each road segment. This is more efficient than making separate calls to snapToRoads and then speedLimits. Returns snapped points with place IDs, original coordinates, and speed limit data in km/h for each road segment. Essential for applications that need both map-matched road geometry and speed limit data, such as fleet management, driver safety monitoring, route planning with speed awareness, and GPS track analysis. AI agents should reference this when users ask "snap these GPS points to roads and show speed limits", "get both snapped coordinates and speed limits for this route", or need combined road matching and speed limit data in one call. Snap GPS coordinates to roads and get speed limits in a single request
get_speed_limits
Returns speed limit values in km/h along with the place IDs and corresponding road segment information. Place IDs are obtained from the snapToRoads or nearestRoads responses. Essential for speed compliance monitoring, fleet safety management, driver behavior analysis, and road safety applications. Speed limits reflect posted legal limits and may vary by road type, urban/rural designation, and local regulations. AI agents should use this when users ask "what is the speed limit on this road segment", "get speed limits for these place IDs", or need speed limit data for specific road segments identified through map matching. Get speed limit data for specific road segments using place IDs
snap_to_roads
Returns snapped coordinates with place IDs, original coordinates, and interpolated points along the road. Essential for map matching, GPS track correction, route reconstruction, fleet tracking visualization, and converting raw GPS traces into clean road geometries. The path parameter accepts up to 100 coordinate pairs in "lat,lng|lat,lng" format. Set interpolate=true to return additional points between input coordinates for smoother road geometry. Place IDs returned can be used with the speed limits endpoint to get speed limit data for each road segment. AI agents should use this when users ask "snap this GPS track to roads", "match these coordinates to the actual roads travelled", or need to clean up noisy GPS data for mapping and visualization. Snap GPS coordinates to the most likely roads travelled using Google Roads API
Example Prompts for Google Roads in Claude Code
Ready-to-use prompts you can give your Claude Code agent to start working with Google Roads immediately.
"Snap these GPS coordinates to roads: 40.7128,-74.0060|40.7135,-74.0055|40.7142,-74.0048"
"Get speed limits for these place IDs: ChIJd8BlQ2BZwokRAFUEcm_qrcA|ChIJd8BlQ2BZwokRAFUEcm_qrcB"
"Find the nearest road to these coordinates: 34.0522,-118.2437 and 34.0530,-118.2445"
Troubleshooting Google Roads MCP Server with Claude Code
Common issues when connecting Google Roads to Claude Code through the Vinkius, and how to resolve them.
Command not found: claude
npm install -g @anthropic-ai/claude-codeConnection timeout
Google Roads + Claude Code FAQ
Common questions about integrating Google Roads MCP Server with Claude Code.
How do I add an MCP server to Claude Code?
claude mcp add --transport http "" in your terminal. Claude Code registers the server and discovers all tools immediately.Can Claude Code run MCP tools in headless mode?
How do I list all connected MCP servers?
claude mcp in your terminal to see all registered servers and their status, or type /mcp inside an active Claude Code session.Connect Google Roads with your favorite client
Step-by-step setup guides for every MCP-compatible client and framework:
Anthropic's native desktop app for Claude with built-in MCP support.
AI-first code editor with integrated LLM-powered coding assistance.
GitHub Copilot in VS Code with Agent mode and MCP support.
Purpose-built IDE for agentic AI coding workflows.
Autonomous AI coding agent that runs inside VS Code.
Anthropic's agentic CLI for terminal-first development.
Python SDK for building production-grade OpenAI agent workflows.
Google's framework for building production AI agents.
Type-safe agent development for Python with first-class MCP support.
TypeScript toolkit for building AI-powered web applications.
TypeScript-native agent framework for modern web stacks.
Python framework for orchestrating collaborative AI agent crews.
Leading Python framework for composable LLM applications.
Data-aware AI agent framework for structured and unstructured sources.
Microsoft's framework for multi-agent collaborative conversations.
Connect Google Roads to Claude Code
Get your token, paste the configuration, and start using 4 tools in under 2 minutes. No API key management needed.