An astronaut overseeing a futuristic data hub

Orchard Frost ProtectionをChatGPTとClaudeに接続

一度設定すれば、ChatGPT、Claude、Cursorなど、お気に入りのクライアントでどれでも動きます。すべては裏側で安全に動くので、あなたは安心して本当に大切なことに集中できます。精密なデータに基づき、果樹の生存率を最大化します

このConnectorについてAIに質問

Vinkiusが開発・運用・ホスティング。

MCP認証済み · 本番環境対応 · Vinkius保証

Waiting for input…

Works with modern AI clients that support MCP, including ChatGPT, Claude, Cursor, and more.

ChatGPTClaudeCursorPerplexityGeminiMicrosoft CopilotRaycastMeta AI

AIが仕事をこなします。私たちが安全に守ります。

他のAIツールではこれは手に入りません。ワークフローはお気に入りのクライアントで動き、アカウントは守られ、エージェントに何を許すかはあなたが決めます。これこそ乗り換えるべき理由です。

すべてのConnectorは当社のインフラストラクチャの中、あなたのワークフローが動くのと同じ場所にあります。下の3つはすでにその一部で、背景で静かに働き、あなたが意識する必要がないようにしてくれます。追加するものも、設定するものも、心配することもありません。

A futuristic MCP client docking bay
V8 Isolate01

各Connectorは独自の密閉された環境内で実行されます。

各Connectorは独自の封印されたV8ランタイムで実行され、ファイル、システム、他のサーバーへのアクセスはありません。Connectorが自身のリクエストを超えて中身を見ることはありません。

Kill Switch02

1つのスイッチで全エージェントを停止。即座に。

1つのアクションで全Connectorを無効化し、全トークンを失効させ、全セッションを終了します。AI Governanceが記録を保持します。

ユーザーごとのFinOps03

驚きではなく、一時停止する支出制限。

各ユーザーは自身の接続と認証情報を持ち、他から隔離されています。支出制限を超える操作は課金されず、あなたの承認を待ちます。

3つのコントロールが、AIが接続するレイヤーに 組み込まれています。

厳選セット · 3機能

届けるのは、本当に必要な動作だけです。

機能セット01 / 01

01-03

このセットには3機能あります。

Orchard Frost Protectionで使える3機能の一部です。

  1. 01

    必要な散水量の算出

    スプリンクラーによる防霜に必要な水の量と散水強度を決定します。

  2. 02

    枯死リスクの評価

    霜の厳しさや継続時間に基づき、果樹園の生物学的なリスクを予測します。

  3. 03

    防霜手法の比較

    特定のシナリオにおいて、異なる防霜技術の適合性を比較検討します。

実際の業務

チームが実際に回している作業

01

Sprinkler Planning

Determine if your current water supply can handle a predicted frost event based on required volume.

02

Risk Assessment

Check the probability of bud mortality when temperatures drop below your critical threshold.

03

Hardware Selection

Decide if wind machines are effective during low wind speed events compared to other methods.

04

Resource Management

Verify if your available water volume is enough to sustain protection for the duration of a frost.

1つのConnector、すべてのAI

Orchard Frost Protectionは、最も人気のあるAIクライアントで動きます。

これは最も人気のあるクライアントで、それぞれにステップバイステップのガイドがあります。リンクは1つ、設定は一度、ガバナンスと可視性は最初から組み込み。しかもすべてMCP標準で動くため、同じ接続は他の対応クライアントでもそのまま使えます。作り直す必要はありません。

自社アプリを作っていますか?Connectorはあなたのもの。

Orchard Frost Protectionを働かせるのにクライアントは不要です。同じホストされた接続が、あなたのアプリやエージェントのコードにそのまま組み込め、すべてのリクエストに同じガバナンスが適用されます。作るのも、会話するのも、1つの接続で両方。

実測値、推定値ではない

平均814ms。本番環境で高速。

Orchard Frost Protectionは本番サービスに対して毎日チェックされています。

日次平均最大1080ms
10月3日今日
最速日
667ms
最遅日
1080ms
14日間の傾向
改善傾向-5%

クライアントを接続

1つのURL。すべてのクライアント。

Connectorを有効化し、リンクをコピーして、いつも使うクライアントに貼り付けるだけ。3個の機能がすぐに使えます。

プレビューアクセス · プロバイダー認証ではありません

vk_preview_* トークンは Vinkius のプレビューインフラに属します。Claude が Orchard Frost Protection のケイパビリティを検出して表示できるようにし、AI の中でその体験を確認できます。

このトークンは Orchard Frost Protection のアカウントを認証するものではありません。認証情報や実際のアカウントデータが必要なアクションは、Connector を有効化してサービスを承認するまで実行されない場合があります。

Orchard Frost Protection Connector

準備完了です。MCPクライアントを選択し、セットアップ手順に従ってください。

コネクタリンクhttps://edge.vinkius.com/vk_preview_Ue5dCsgqsH5hgRoYbCsiyZdzyKVReXT85eZ65qaU/mcp

Claude Desktop

以下の手順で数秒で接続できます。

  1. 1In Claude Desktop, open Settings → Connectors.
  2. 2Click “Add custom connector” and paste the connector link above as the remote MCP server URL.
  3. 3Click Add and start a new chat — Orchard Frost Protection capabilities are ready to use.
設定 · claude_desktop_config.jsonコピー
{
  "mcpServers": {
    "orchard-frost-protection-mcp": {
      "url": "https://edge.vinkius.com/vk_preview_Ue5dCsgqsH5hgRoYbCsiyZdzyKVReXT85eZ65qaU/mcp"
    }
  }
}
  • Claude
  • ChatGPT
  • Cursor
  • VS Code
  • Windsurf
  • Claude Code
  • JetBrains
  • Cline

各クライアントの手順ガイドはこちらです。 接続方法

Claude向けのガイド付きセットアップ? Orchard Frost ProtectionをClaudeや他のAIに設定する

このConnectorが対応するすべてのAIクライアントを見る ↑

対象ユーザー

Orchard Frost Protectionユーザーが任せたい仕事のために。

果樹栽培に従事する専門家や農業経営者が、霜害による収穫へのダメージを最小限に抑えるために使用します。

  • 01

    果樹園管理者

    霜害発生時の防霜対策の計画と実行を迅速に判断するために活用します。

  • 02

    農業技術者

    エネルギー収支に基づいた精密な水管理やリスク予測のシミュレーションに使用します。

  • 03

    農業経営者

    防霜設備の投資対効果や、気象条件に応じた最適な対策手法の選択に役立てます。

FAQ

Orchard Frost Protectionユーザーからのよくある質問。

  • 01

    How does this MCP help with frost protection?

    It provides the math for water application rates, predicts biological mortality risk, and compares the effectiveness of different protection technologies like wind machines and heaters.

  • 02

    What kind of AI clients can I use with this MCP?

    You can use any MCP-compatible client, including Claude, Cursor, Windsurf, or VS Code.

  • 03

    Can I use this to decide if I have enough water for my sprinklers?

    Yes, the calculate_water_requirements capability tells you the exact volume and intensity needed, which you can compare against your available water supply.

  • 04

    Does it predict if my buds will die?

    Yes, the evaluate_mortality_risk capability predicts the biological risk to the orchard based on how long and how cold the frost is.

  • 05

    How does it compare different frost mitigation methods?

    The compare_protection_methods capability evaluates the suitability of wind machines, heaters, and sprinklers for your specific weather scenario.

  • 06

    How do I calculate the water needed for my orchard?

    You can use the calculate_water_requirements capability by providing the critical temperature, forecast low, dew point, wind speed, orchard size, and available water supply.

  • 07

    Can I predict if my fruit trees will survive the frost?

    Yes, the evaluate_mortality_risk capability predicts the likelihood of bud mortality based on the temperature threshold and how long the frost lasts.

  • 08

    Which protection method is best for my current weather conditions?

    Use the compare_protection_methods capability to see how sprinklers, wind machines, and heaters perform under your specific temperature and wind speed conditions.

『Orchard Frost Protection』を Claude、Cursor、ChatGPT などに接続