Honeywell Home Connector for AI agents.
10 live capabilities
Control your smart home security and HVAC system with natural language commands.
Waiting for input…
Why people use Honeywell Home
Honeywell Home for Smart Home Security Management
With this Connector, you can ditch the app switching. You just ask your AI agent for a status update, and it pulls the data from your Honeywell hardware into one place. You get a clear summary of your security, climate, and air quality in a single conversation.
What Vinkius changes
You get a natural language interface for your entire Honeywell Home ecosystem.
Use it from Claude, ChatGPT, Cursor or another AI client you already have.
One account · 5,900+ Connectors
- Real-world use case 01
Securing the house for a trip
I'm leaving for a week.
- Real-world use case 02
Checking indoor air safety
I'm worried about the air quality in the basement.
- Real-world use case 03
Verifying the front door
I see movement on the porch.
Complete set · 10capabilities
The complete Honeywell Home capability set.
These are the exact actions your AI can choose when you ask it to work with Honeywell Home.
01—04
4 capabilities in this set.
Part of 10 available through Honeywell Home.
- 01 Capability
Get air quality
Retrieves PM2.5, VOC, CO2, and humidity levels to help you monitor indoor air health.
- 02 Capability
Arm system
Sets the security system to stay or away mode depending on whether you are home or out.
- 03 Capability
Get camera snapshot
Grabs a single image from a specific camera for a quick visual check of a room.
- 04 Capability
Get camera status
Checks if a specific camera is currently active and functioning.
05—07
3 capabilities in this set.
Part of 10 available through Honeywell Home.
- 05 Capability
Get devices
Lists every piece of hardware connected to your Honeywell Home account.
- 06 Capability
Disarm system
Turns off the security system when you arrive home or need to let someone in.
- 07 Capability
Get locations
Finds all registered addresses and locations associated with your account.
08—10
3 capabilities in this set.
Part of 10 available through Honeywell Home.
- 08 Capability
Get security status
Shows the current arming state and the status of all connected door and motion sensors.
- 09 Capability
Update setpoint
Changes the temperature targets or the HVAC mode for your thermostat.
- 10 Capability
Get thermostat data
Shows the current target temperature and whether your heating or cooling is running.
Set up in minutes
One URL. Then ask Honeywell Home to work.
Claude and ChatGPT only need the Connector URL. Copy it once, add it in settings, and use Honeywell Home from the conversation.
Choose your client
Live previewAdvanced clients IDE · CLI
Claude · Web + desktop
Connector URL · ready to paste
Streamable HTTPhttps://edge.vinkius.com/vk_preview_giVFLkqDE1JEVvxQXgzxQDCQgihJFwsPWh7mWMkn/mcp - Step 01
Open Connectors
In Claude Web or Claude Desktop, open Settings and choose Connectors.
- Step 02
Add the URL
Choose Add custom connector, name it Honeywell Home, and paste the URL above.
- Step 03
Turn it on in chat
Select +, open Connectors, and enable Honeywell Home for the conversation.
ChatGPT · Web + desktop
Connector URL · ready to paste
Streamable HTTPhttps://edge.vinkius.com/vk_preview_giVFLkqDE1JEVvxQXgzxQDCQgihJFwsPWh7mWMkn/mcp - Step 01
Open MCP settings
On desktop, open Settings and MCP servers. On web, open your workspace app or connector settings.
- Step 02
Add the URL
Choose Add server with Streamable HTTP, or create a custom MCP app, then paste the Honeywell Home URL.
- Step 03
Save and start
Save the connection and enable Honeywell Home in your conversation. Desktop may ask you to restart once.
Cursor · IDE configuration
Advanced setup
{
"mcpServers": {
"honeywell-home": {
"url": "https://edge.vinkius.com/vk_preview_giVFLkqDE1JEVvxQXgzxQDCQgihJFwsPWh7mWMkn/mcp"
}
}
}- Step 01
Open MCP Settings
Press Cmd+Shift+P (macOS) or Ctrl+Shift+P (Windows/Linux) → search "MCP Settings"
- Step 02
Add the server config
Paste the JSON configuration above into the mcp.json file that opens
- Step 03
Save the file
Cursor will automatically detect the new Connector
- Step 04
Start using Honeywell Home
Open Agent mode in chat and ask: "Using Honeywell Home, help me...". 10 tools available
VS Code Copilot · IDE configuration
Advanced setup
{
"mcpServers": {
"honeywell-home": {
"url": "https://edge.vinkius.com/vk_preview_giVFLkqDE1JEVvxQXgzxQDCQgihJFwsPWh7mWMkn/mcp"
}
}
}- Step 01
Create MCP config
Create a .vscode/mcp.json file in your project root
- Step 02
Add the server config
Paste the JSON configuration above
- Step 03
Enable Agent mode
Open GitHub Copilot Chat and switch to Agent mode using the dropdown
- Step 04
Start using Honeywell Home
Ask Copilot: "Using Honeywell Home, help me...". 10 tools available
Windsurf · IDE configuration
Advanced setup
{
"mcpServers": {
"honeywell-home": {
"url": "https://edge.vinkius.com/vk_preview_giVFLkqDE1JEVvxQXgzxQDCQgihJFwsPWh7mWMkn/mcp"
}
}
}- Step 01
Open MCP Settings
Go to Settings → MCP Configuration or press Cmd+Shift+P and search "MCP"
- Step 02
Add the server
Paste the JSON configuration above into mcp_config.json
- Step 03
Save and reload
Windsurf will detect the new server automatically
- Step 04
Start using Honeywell Home
Open Cascade and ask: "Using Honeywell Home, help me...". 10 tools available
Cline · IDE configuration
Advanced setup
{
"mcpServers": {
"honeywell-home": {
"url": "https://edge.vinkius.com/vk_preview_giVFLkqDE1JEVvxQXgzxQDCQgihJFwsPWh7mWMkn/mcp"
}
}
}- Step 01
Open Cline MCP Settings
Click the Connectors icon in the Cline sidebar panel
- Step 02
Add remote server
Click "Add Connector" and paste the configuration above
- Step 03
Enable the server
Toggle the server switch to ON
- Step 04
Start using Honeywell Home
Ask Cline: "Using Honeywell Home, help me...". 10 tools available
Claude Code · Terminal command
Advanced setup
claude mcp add honeywell-home --transport http "https://edge.vinkius.com/vk_preview_giVFLkqDE1JEVvxQXgzxQDCQgihJFwsPWh7mWMkn/mcp"- Step 01
Install Claude Code
Run npm install -g @anthropic-ai/claude-code if not already installed
- Step 02
Add the Connector
Run the command above in your terminal
- Step 03
Verify the connection
Run claude mcp to list connected servers, or type /mcp inside a session
- Step 04
Start using Honeywell Home
Ask Claude: "Using Honeywell Home, show me...". 10 tools are ready
Where the request belongs
Work Honeywell Home can move forward.
This is for homeowners who want a unified way to manage their smart home, property managers overseeing multiple units, and anyone tired of jumping between security and climate apps.
Homeowner
The person who wants to ensure their doors are locked and the AC is off before they leave for a trip.
Property Manager
The manager who needs to check the HVAC status and security of several rental units from one chat window.
Smart Home Enthusiast
The power user who wants to integrate their Honeywell hardware into a broader AI-driven automation workflow.
Build the capability set
Add more capabilities.
Each Connector adds new actions and data without changing how you work.
Browse ConnectorsHoneywell Process
Connect Honeywell Process to any AI agent via MCP.
Honeywell Forge
Connect Honeywell Forge to any AI agent via MCP.
Alexa Smart Home
Control Alexa-connected smart home devices. lights, thermostats, speakers, and sensors via Alexa Smart Properties API.
Cisco Meraki
Manage cloud-managed networking via Cisco Meraki. track devices, monitor clients, and audit network health directly from any AI agent.
Zapier Smart Home
Control smart home devices via natural language through Zapier NLA API. access 5000+ app integrations for home automation.
SmartThings
Control and monitor your smart home ecosystem. manage devices, check real-time statuses, and trigger scenes directly from your AI agent.
Bring your own AI
Change the model, client or framework. Keep Honeywell Home connected.
-
Claude -
ChatGPT -
Gemini -
Cursor -
VS Code -
Windsurf -
ZCode -
Cline -
Zed -
Continue -
Kiro -
Roo Code -
Zencoder -
Goose -
Void -
Augment Code -
Amp -
Qodo -
Tabnine -
Pieces -
Sourcegraph Cody -
JetBrains -
Warp -
Amazon Q -
Antigravity -
BoltAI -
Raycast -
Jan -
LM Studio -
AnythingLLM -
Open WebUI -
Msty -
Cherry Studio -
LibreChat -
TypingMind -
Chorus -
5ire -
n8n -
LangChain -
LlamaIndex -
CrewAI -
Vercel AI SDK
Before you connect
Questions about Honeywell Home.
The practical details behind the request, access and result.
Can the Honeywell Home MCP control my thermostat?
Yes, it lets you adjust your heat and cool setpoints or change your HVAC mode using just your voice or text.
Does the Honeywell Home MCP work with my cameras?
It can grab snapshots from your cameras so you can see what's happening in specific rooms at a glance.
How do I use the Honeywell Home MCP to check my air quality?
You can ask your agent for a status update on your air quality, and it will pull the latest PM2.5, VOC, and CO2 levels.
Can I arm my security system with the Honeywell Home MCP?
Yes, you can switch between 'stay' and 'away' modes to secure your home while you're inside or out.
Does the Honeywell Home MCP support multiple locations?
It can access all locations registered to your Honeywell Home account, making it useful for managing multiple properties.
Can I see what devices are connected via the Honeywell Home MCP?
Your agent can list every device connected to your account, which is great for keeping track of your smart home inventory.
One connection away
Give your agent a direct line to Honeywell Home.
Connect Honeywell Home once. Keep it beside 5,900+ managed Connectors when the next task needs more.
Explore every Connector No credit card required · Free tier available