WMATA MCP Server for OpenAI Agents SDK 12 tools — connect in under 2 minutes
The OpenAI Agents SDK enables production-grade agent workflows in Python. Connect WMATA through Vinkius and your agents gain typed, auto-discovered tools with built-in guardrails. no manual schema definitions required.
ASK AI ABOUT THIS MCP SERVER
Vinkius supports streamable HTTP and SSE.
import asyncio
from agents import Agent, Runner
from agents.mcp import MCPServerStreamableHttp
async def main():
# Your Vinkius token. get it at cloud.vinkius.com
async with MCPServerStreamableHttp(
url="https://edge.vinkius.com/[YOUR_TOKEN_HERE]/mcp"
) as mcp_server:
agent = Agent(
name="WMATA Assistant",
instructions=(
"You help users interact with WMATA. "
"You have access to 12 tools."
),
mcp_servers=[mcp_server],
)
result = await Runner.run(
agent, "List all available tools from WMATA"
)
print(result.final_output)
asyncio.run(main())
* Every MCP server runs on Vinkius-managed infrastructure inside AWS - a purpose-built runtime with per-request V8 isolates, Ed25519 signed audit chains, and sub-40ms cold starts optimized for native MCP execution. See our infrastructure
About WMATA MCP Server
Connect your WMATA API Washington DC public transit data platform to any AI agent and take full control of real-time Metrorail and Metrobus tracking, incident monitoring, and station information through natural conversation.
The OpenAI Agents SDK auto-discovers all 12 tools from WMATA through native MCP integration. Build agents with built-in guardrails, tracing, and handoff patterns. chain multiple agents where one queries WMATA, another analyzes results, and a third generates reports, all orchestrated through Vinkius.
What you can do
- Next Rail Predictions — Get real-time next train predictions system-wide or at specific Metrorail stations
- Station Discovery — List all Metrorail stations with codes, addresses, coordinates, and line affiliations
- Station Predictions — Get detailed next train arrivals at any specific Metrorail station
- Metrobus Tracking — Track real-time GPS positions of all Metrobus vehicles or filter by route
- Bus Route Details — Get complete route information including stop sequences for any Metrobus route
- Rail Incidents — Monitor active service disruptions affecting Metrorail lines and stations
- Bus Incidents — Check current incidents and detours affecting Metrobus service
- Elevator Outages — Track elevator and escalator outages for accessibility planning
- Station Entrances — Get street-level entrance information for any Metrorail station
- Parking Lots — Find station parking availability, fees, and amenities for park-and-ride planning
- Bus Routes — Browse all Metrobus routes operating across DC, Maryland, and Virginia
- Bus Predictions — Get next bus arrival predictions at stations and stops
The WMATA MCP Server exposes 12 tools through the Vinkius. Connect it to OpenAI Agents SDK in under two minutes — no API keys to rotate, no infrastructure to provision, no vendor lock-in. Your configuration, your data, your control.
How to Connect WMATA to OpenAI Agents SDK via MCP
Follow these steps to integrate the WMATA MCP Server with OpenAI Agents SDK.
Install the SDK
Run pip install openai-agents in your Python environment
Replace the token
Replace [YOUR_TOKEN_HERE] with your Vinkius token from cloud.vinkius.com
Run the script
Save the code above and run it: python agent.py
Explore tools
The agent will automatically discover 12 tools from WMATA
Why Use OpenAI Agents SDK with the WMATA MCP Server
OpenAI Agents SDK provides unique advantages when paired with WMATA through the Model Context Protocol.
Native MCP integration via `MCPServerSse`, pass the URL and the SDK auto-discovers all tools with full type safety
Built-in guardrails, tracing, and handoff patterns let you build production-grade agents without reinventing safety infrastructure
Lightweight and composable: chain multiple agents and MCP servers in a single pipeline with minimal boilerplate
First-party OpenAI support ensures optimal compatibility with GPT models for tool calling and structured output
WMATA + OpenAI Agents SDK Use Cases
Practical scenarios where OpenAI Agents SDK combined with the WMATA MCP Server delivers measurable value.
Automated workflows: build agents that query WMATA, process the data, and trigger follow-up actions autonomously
Multi-agent orchestration: create specialist agents. one queries WMATA, another analyzes results, a third generates reports
Data enrichment pipelines: stream data through WMATA tools and transform it with OpenAI models in a single async loop
Customer support bots: agents query WMATA to resolve tickets, look up records, and update statuses without human intervention
WMATA MCP Tools for OpenAI Agents SDK (12)
These 12 tools become available when you connect WMATA to OpenAI Agents SDK via MCP:
get_bus_incidents
Returns incident descriptions, affected route IDs, detour information, bus stop closures, incident types (accident, road closure, construction, mechanical), start timestamps, and alternative service recommendations. Essential for bus service disruption awareness, alternative route planning, and passenger communication. AI agents should use this when users ask "are there any bus delays", "is route 30N running normally", or need to check Metrobus service reliability. Get current incidents affecting Metrobus service
get_bus_positions
Returns bus vehicle IDs, route IDs, latitude/longitude coordinates, trip IDs, destination names, deviation from schedule in seconds, and direction. Can query all buses system-wide or filter by specific route ID. Essential for real-time bus tracking, passenger wait time estimation, and bus arrival prediction. AI agents should reference this when users ask "where is the X2 bus", "show all buses on route 30N", or need to track Metrobus vehicles in real-time. Route IDs are typically 2-5 character identifiers (e.g., "30N", "X2", "L2"). Use getBusRoutes first to find route IDs if unknown. Get real-time positions of Metrobus vehicles, optionally filtered by route
get_bus_route_details
Returns all stops served by the route in order, trip headsigns, and route path information. Essential for route planning, understanding bus service coverage, stop discovery, and passenger journey preparation. AI agents should use this when users ask "what stops does the 30N bus serve", "show me the route details for X2", or need complete route structure including stop sequences for trip planning. Get detailed information about a specific Metrobus route
get_bus_routes
Returns route IDs, route names, descriptions, and route types. Covers all WMATA-operated bus routes including limited-stop, local, and express services across DC, Maryland, and Virginia. Essential for route discovery, service area analysis, transit network understanding, and identifying route IDs for use in bus position and route detail queries. AI agents should reference this when users ask "list all bus routes", "what bus routes serve DC", or need to identify route IDs for subsequent Metrobus queries. List all Metrobus routes in the WMATA system
get_circuit_predictions
Returns bus route IDs, destination names, predicted arrival times in minutes, trip IDs, and vehicle IDs. Supports filtering by station code for station-specific predictions or system-wide queries. Essential for bus trip planning, real-time bus arrival awareness, and connection coordination between Metrorail and Metrobus. AI agents should use this when users ask "when is the next bus at Union Station", "show bus predictions for Foggy Bottom", or need real-time bus arrival predictions at a specific station or stop. Get next bus arrival predictions for Metrobus Circuit routes
get_elevator_incidents
Returns affected station codes and names, elevator/escalator identifiers, outage descriptions, estimated repair times, outage start timestamps, and accessibility impact information. Essential for accessibility planning, wheelchair route verification, senior and disability passenger support, and station accessibility awareness. AI agents should use this when users ask "are there any elevator outages at Gallery Place", "is the elevator working at Union Station", or need to verify station accessibility before planning journeys for passengers with mobility needs. Get current elevator and escalator outages at Metrorail stations
get_next_rail
Returns train destination names, lines (Red, Orange, Silver, Blue, Yellow, Green), predicted arrival times in minutes, car counts, group numbers, and train direction. Can query all trains system-wide or filter by specific station code. Essential for commuter trip planning, real-time arrival awareness, and station crowd management. AI agents should use this when users ask "when is the next train", "show upcoming trains at Gallery Place", or need real-time Metrorail arrival predictions. Station codes are 3-letter identifiers (e.g., "A01" for Metro Center, "B36" for Gallery Place). Use getRailStations first to find station codes if unknown. Get next train predictions across the entire Metrorail system or at a specific station
get_parking_lots
Can query all parking lots system-wide or filter by specific station code. Essential for park-and-ride trip planning, commuter parking availability, station selection for driving passengers, and transportation mode choice analysis. AI agents should use this when users ask "which stations have parking", "how many spaces are at Shady Grove", or need to plan park-and-ride journeys from suburban areas into DC. Get Metrorail station parking lot information
get_rail_incidents
Returns incident descriptions, affected station codes, line impacts, incident types (delay, power problem, medical, police activity, track maintenance), severity indicators, start timestamps, and estimated resolution times. Essential for service disruption awareness, alternative route planning, passenger communication, and understanding system reliability. AI agents should reference this when users ask "are there any delays on the Red Line", "is Metro running normally", or need to check service reliability before planning Metrorail journeys. Get current incidents affecting Metrorail service
get_rail_stations
Can filter by line code (RD=Red, OR=Orange, SV=Silver, BL=Blue, YL=Yellow, GR=Green) to show only stations on that line. Essential for station discovery, route planning, understanding line structure, and mapping the Metrorail network. AI agents should reference this when users ask "list all stations on the Red Line", "what is the station code for Foggy Bottom", or need to understand station sequences and line geography. Station codes are required for subsequent queries like next trains, predictions, entrances, and parking. List all Metrorail stations, optionally filtered by line
get_station_entrances
Returns entrance names, street addresses, latitude/longitude coordinates, entrance descriptions, and whether the entrance has escalator or elevator access. Essential for station navigation, first-time visitor guidance, street-level wayfinding, accessible entrance identification, and trip end planning. AI agents should reference this when users ask "where are the entrances to Metro Center", "find the closest entrance to Gallery Place", or need street-level navigation guidance for reaching a Metrorail station. Get entrance information for a specific Metrorail station
get_station_prediction
Returns trains with destination names, line colors, predicted arrival times, car counts, and train direction. More targeted than system-wide next rail queries. Essential for passenger waiting at a specific station, connection planning, and real-time arrival boards. AI agents should use this when users ask "when is the next train at Silver Spring", "show trains coming to Shady Grove", or need station-specific arrival predictions. Requires station code from getRailStations results. Get next train predictions at a specific Metrorail station
Example Prompts for WMATA in OpenAI Agents SDK
Ready-to-use prompts you can give your OpenAI Agents SDK agent to start working with WMATA immediately.
"Show me the next trains arriving at Gallery Place station."
"Are there any incidents affecting the Red Line right now?"
"Where is the closest entrance to Metro Center station from 12th Street?"
Troubleshooting WMATA MCP Server with OpenAI Agents SDK
Common issues when connecting WMATA to OpenAI Agents SDK through the Vinkius, and how to resolve them.
MCPServerStreamableHttp not found
pip install --upgrade openai-agentsAgent not calling tools
WMATA + OpenAI Agents SDK FAQ
Common questions about integrating WMATA MCP Server with OpenAI Agents SDK.
How does the OpenAI Agents SDK connect to MCP?
MCPServerSse(url=...) to create a server connection. The SDK auto-discovers all tools and makes them available to your agent with full type information.Can I use multiple MCP servers in one agent?
MCPServerSse instances to the agent constructor. The agent can use tools from all connected servers within a single run.Does the SDK support streaming responses?
Connect WMATA with your favorite client
Step-by-step setup guides for every MCP-compatible client and framework:
Anthropic's native desktop app for Claude with built-in MCP support.
AI-first code editor with integrated LLM-powered coding assistance.
GitHub Copilot in VS Code with Agent mode and MCP support.
Purpose-built IDE for agentic AI coding workflows.
Autonomous AI coding agent that runs inside VS Code.
Anthropic's agentic CLI for terminal-first development.
Python SDK for building production-grade OpenAI agent workflows.
Google's framework for building production AI agents.
Type-safe agent development for Python with first-class MCP support.
TypeScript toolkit for building AI-powered web applications.
TypeScript-native agent framework for modern web stacks.
Python framework for orchestrating collaborative AI agent crews.
Leading Python framework for composable LLM applications.
Data-aware AI agent framework for structured and unstructured sources.
Microsoft's framework for multi-agent collaborative conversations.
Connect WMATA to OpenAI Agents SDK
Get your token, paste the configuration, and start using 12 tools in under 2 minutes. No API key management needed.